This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 137.270(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets. | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(4)(iv) | IMO Resolution A.700(17) | 1991 | Performance Standards for Narrow-band Direct-printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings and Urgent Information to Ships (MSI) by HF | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 147.1700(a)(5) | NCUIC regulations | 1989 | North Carolina Drinking Water Act, N.C. GEN. STAT. §§ 130A-311 through 130A-332 | State of North Carolina | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.5 | ASHRAE 23 | 2005 | Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 61.270(a) | ASTM D 835 | 1985 | Standard Specification for Refined Benzene--485 | ASTM International | |
Environmental Protection Agency | 40 CFR 147.300(a)(1) | COUIC regulations | 1989 | Colorado Revised Statutes, 1989 replacement volume, Section 34-60-101 through 34-60-123 | State of Colorado | |
Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 129 | 2000 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1813-17(f)(1) | ANSI NGV1 | 2006 | Connection Devices, 2nd edition 2006 EPA/AP | American National Standards Institute | |
Coast Guard | 33 CFR 183.430(a)(2)(ii) | SAE J-1127 | 1980 | Battery Cable | Society of Automotive Engineers | |
Coast Guard | 46 CFR 25.45-2(b)(3)(ii) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(3)(ii) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(n)(2) | BS EN 14439 | 2006 | Cranes--Safety--Tower Cranes | British Standards Institution | |
Coast Guard | 46 CFR 160.151-21(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 177.410(b) | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. N, 6.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-5(b)(12) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c)(1)(i) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(iii) | NFPA 36 | 1967 | Standard for Solvent Extraction Plants | National Fire Protection Association | |
National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | AIIM MS43 | 1998 | Standard Recommended Practice--Operational Procedures--Inspection and Quality Control of Microfilms and Documents and From COM | Association for Information and Image Management | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | APHA Method 3112 B | 1995 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7091 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 142.33(b) | ANSI Z41.1 | 1983 | Protective Footwear | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 56.6201(b)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 39.1005(e)(2) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (11) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(iv) | USGS Open File Report (OFR) 93-125 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments | U.S. Geological Survey | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2004 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 183.380(m) | UL 489 | 1991 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 435.15 Note 7 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 179.45(d)(2)(iv) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-94 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (61) | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(i) | ASTM E 1941 | 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(4) | MCC Publication | 1998 | Method for Measuring the Ester Distribution mof Sucrose Oligoesters | Mitsubishi Chemical Corporation | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(4) | ASME B30.14, Section 14-1.7.1 | 2004 | Side Boom Tractors, Booms | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (69) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | APHA Method 2540 D | 1997 | Solids, Total Suspended Solids Dried at 103-105 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 169.3(b) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.002-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods |