This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(1)(i) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.12 | 2001 | Handling Loads Suspended from Rotor-craft | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(18) | ASTM D 93 | 2008 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(a)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(3) | ASME B30.7 | 2001 | Base-Mounted Drum Hoists | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(i) | SAE J-1063 | 1993 | Cantilevered Boom Crane Structures--Method of Test | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2005 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(6) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart T Appendix C (4)(a)(i) | DSAT Oxygen Exposure Table | 1995 | Enriched Air Operations and Resource Guide | Professional Association of Diving Instructors | |
Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-185 | 1988 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(32) | ANSI B175.1 | 1991 | Safety Requirements for Gasoline-Powered Chain Saws | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(51) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(6)(ii) | NFPA 78 | 1968 | Lightning Protection Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(a)(2)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.252(b)(2)(ii)(I) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(ii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(61) | ANSI Z41 | 1991 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1430/F 1430M | 2010 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(7) | ASTM B 88 | 1969 | Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.103(b)(1)(i) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (2)(E) | Federal Test Method Standard 191, Method 5136 | 1968 | Textile Test Methods | Asphalt Roofing Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(6) | ANSI/NFPA 231 | 2014 | Standard for Indoor General Storage | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (1)(C) | MIL-B-2885D | 1975 | Military Specification For Fireman's Boots amendment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.4 | 2003 | Portal, Tower, and Pedestal Cranes | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.44(n)(5)(i) | NHTSA Publication | 2014 | Multi-Piece Rim Wheel Matching Chart | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.1 Addendum | 1965 | Safety Release Device Standard--Cylinders for Compressed Gases Addendum | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(aa)(2) | PCSA 2 | 1968 | Mobile Hydraulic Crane Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1438(b)(2)(iii) | ASME B30.2 | 2005 | Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 142 | 1968 | Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(19) | NFPA 80 | 1970 | Standard for the Installation of Fire Doors and Windows | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(8) | ANSI Z87.1 | 2014 | Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(10) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(i)(A) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.262(h)(1)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(55) | ANSI Z21.30 | 1964 | Requirements for Gas Appliances and Gas Piping Installations | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 126 | 1966 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.181(b)(2) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(58) | ANSI Z33.1 | 1966 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(13)(i) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.102(c)(2) | NFPA 51A | 2001 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.68(b)(12) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 497 | 2004 | Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas | National Fire Protection Association |