This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (8)(a)(i)(2)(a) | ASTM D 5790 | 1995 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(j)(6)(iii) | NFPA 36 | 1967 | Standard for Solvent Extraction Plants | National Fire Protection Association | |
National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | AIIM MS43 | 1998 | Standard Recommended Practice--Operational Procedures--Inspection and Quality Control of Microfilms and Documents and From COM | Association for Information and Image Management | |
Coast Guard | 46 CFR 39.1005(e)(2) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (11) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 | ASTM D 2163 | 2007 | Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(m)(3) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Veterans Affairs Department | 38 CFR 17.63(a)(2) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 33 CFR 142.33(b) | ANSI Z41.1 | 1983 | Protective Footwear | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 56.6201(b)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2004 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 182.455(c) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63.14(g)(81) | ASTM D 6721 | 2001 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry | ASTM International | |
Agricultural Marketing Service | 7 CFR 51.888(a) | CA State Regulations | 1996 | California Code of Regulations, Title 3, Subchapter 4. Fresh Fruits, Nuts and Vegetables, Article 25, Table Grapes and Raisins | State of California, Code of Regulations | |
Veterans Affairs Department | 38 CFR 17.81(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Glazing surface reference line | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (45) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 80 | 1963 | Standard for Steel Inside Tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 5174 | 1997 | Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 1072 | 1990 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Coast Guard | 46 CFR 160.002-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 169.3(b) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 95.10-10(c) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(i)(C) | 35 I.A.C. 215 | 1989 | Administrative Code, Sections 215.584(b) or (d) | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(j)(3)(vii) | ASTM D 3349 | 1986 | Standard Test Method for Absorption Coefficient of Carbon Black Pigmented Ethylene Plastic | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.249(d) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-47 | 1975 | Isolation Transformers for Airport Lighting Systems | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 12.02-11(a)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (10) | APHA Method 4500-B B | 2000 | Boron by Curcumin Method | American Public Health Association | |
Coast Guard | 21 CFR 102.23(c)(8) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 39.1005(h)(1) | NFPA 70 | 2011 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 265.1063(d)(1) | ASTM E 168 | 1988 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(b) | SAE J-581 | 2004 | Auxiliary Upper Beam Lamps | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-120(c)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | APHA Method 5310 C | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | ASTM D 3559D | 1996 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.5 | ANSI C78.81 | 2003 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.41(b)(2) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(Y) | EPA Method 1659 | 2014 | The Determination of Dazomet in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.1 | 1971 | Copper (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.2201(a)(2) | TXUIC regulations | 1978 | Texas Natural Resources Code Annotated sections 85.041, 85.045, 85.046 and 85.052 (Vernon 1978 and Supp. 1982) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11155(e)(3) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International |