This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 1065.1010(b)(34) | ASTM D 5291 | 2010 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Coast Guard | 46 CFR 160.151-21(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1042 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 55.14(e)(11)(i)(A) | 40 CFR part 52, subpart W | 2010 | Commonwealth of Massachusetts Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Energy Department | 86 FR 56608 | 10 CFR 429 | ANSI/AHAM HLD–1–2010 | 2010 | Energy Conservation Program: Test Procedure for Clothes Dryers | Association of Home Appliance Manufacturers |
Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Revised recommendation on testing | 2010 | Revised recommendation on testing of life-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(iii) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584b | 2011 | Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 12 | 2011 | Carbon Dioxide Fire Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
National Highway Traffic Safety Administration | 49 CFr 572.175(a) | Drawing No. 420-4300 | 2011 | Abdominal insert | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(1) | DICOM Standard PS 3.3-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.11(t) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(y) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Food Safety and Inspection Service | 45 CFR 162.920(d)(1) | NACHA Publication | 2011 | 2011 NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network, NACHA Operating Rules, Appendix One: ACH File Exchange Specifications (Operating Rule 59) | National Automated Clearing House Association | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(v) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(F) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 6 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Health and Human Services Department | 45 CFR 162.920(c)(2) | CAQH Publication | 2011 | ACME Health Plan, HIPAA Transaction Standard Companion Guide, Refers to the Implementation Guides Based on ASC X12 version 005010, CORE v5010 Master Companion Guide Template, 005010, 1.2, (CORE v 5010 Master Companion Guide Template, 005010, 1.2) | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 88 FR 59662 | 40 CFR 761 | ASTM D3278-96(2011) | 2011 | Alternate PCB Extraction Methods and Amendments to PCB Cleanup and Disposal Regulations | ASTM International |
Coast Guard | 46 CFR 160.077-11(b)(1)(iii) | UL 1191 | 2011 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Energy Department | 87 FR 55090 | 10 CFR 430 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (v) | Drawing No. 420-5000-1 | 2011 | Complete leg assembly, left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(5) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.51(c) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
Environmental Protection Agency | 40 CFR 63.14(g)(48) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (b)(2)(v) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(28) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(1)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 85 FR 13524 | 40 CFR 63 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Stationary Combustion Turbines Residual Risk and Technology Review | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Energy Department | 87 FR 30775 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Direct Heating Equipment | International Electrotechnical Commission |
Federal Communications Commission | 88 FR 21424 | 47 CFR 67 | RTCM 12800.0 | 2011 | Establishment of the Space Bureau and the Office of International Affairs and Reorganization of the Consumer and Governmental Affairs Bureau and the Office of the Managing Director | Radio Technical Commission for Maritime Services |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-3560 | 2011 | Chest flesh assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(2) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 141.40(c)(1)(ii) | EPA Method 218.7 | 2011 | Determination of Hexavalent Chromium in Drinking Water by Ion Chromatography with Post-Column Derivatization and UV-Visible Spectroscopic Detection, Version 1.0 | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE 45.2–2011 | 2011 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Health and Human Services Department | 45 CFR 162.1203(a)(9) | CAQH Publication | 2011 | Phase II CORE 260: Eligibility & Benefits Data Content (270/271) Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 45 CFR 162.920(c)(3)(iii) | CAQH Publication | 2011 | Phase II CORE 259: Eligibility and Benefits 270/271 AAA Error Code Reporting Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Energy Department | 88 FR 15510 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Consumer Boilers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(vi) | Drawing No. 420-5000-1 | 2011 | Complete Leg Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(5) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.8) | 40 CFR Part 136, appendix B | 2011 | Definition and Procedure for the Determination of the Method Detection Limit-Revision 1.11 | U.S. Environmental Protection Agency | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(G) | DICOM Standard PS 3.16-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource | National Electrical Manufacturers Association |