This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1065 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Nuclear Regulatory Commission | 10 CFR 50.55a(c)(3)(iv) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 86 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1066.310(b)(8)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3299 | 2010 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(39) | ASTM D 3370 | 2010 | Standard Practices for Sampling Water from Closed Conduits | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Coast Guard | 46 CFR 160.151-21(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.11237 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 914/F 914M | 2010 | Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments | ASTM International | |
Coast Guard | 46 CFR 160.132-15(e) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60.41b Distillate oil | ASTM D 7467 | 2010 | Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20), including Appendices X1 through X3 | ASTM International | |
Coast Guard | 46 CFR 160.151-21(t) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1045 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.133-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(b) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-31(e) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 60 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1090 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Labor Department | 86 FR 54611 | 29 CFR 1915 | ANSI/ISEA Z87.1–2010 | 2010 | Incorporation by Reference; Notice of Corrections | American National Standards Institute |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1054 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 95 | 2010 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 Note 6 | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 600.116-12(c) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 80.580(c)(2)(i) | ASTM D 4294 | 2010 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 46 CFR 160.151-15(a) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-17(b) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1068 | SAE J1263_201003 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 98, Subpart I, Appendix A, (c) | EPA-430-R-10-003 | 2010 | Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1033 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 86 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.051-5(b)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.7575 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 160.151-21(o) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 80.46(b)(2) | ASTM D 6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Coast Guard | 46 CFR 160.151-15(i) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1066 | SAE J1594_201007 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.170-5(c)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 162.060-34(f)(1) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.96 (c) | AHRI 1230-2010 | 2010 | 2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment | Air Conditioning, Heating, and Refrigeration Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.226 S7.1.1 | NHTSA Parts List | 2010 | Ejection Mitigation Headform Drawing Package | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 18396 | 40 CFR 60 | ASTM–D6348–03(R2010) | 2010 | Testing Provisions for Air Emission Sources | ASTM International |
Environmental Protection Agency | 40 CFR 1065.1010(b)(36) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Coast Guard | 46 CFR 160.151-31(d) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4097 | 2010 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks | ASTM International | |
Coast Guard | 46 CFR 160.010-1(c)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 38 | EPA Method 1664 | 2010 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision B | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1329(c)(2)(ii) | ASTM D 3370 | 2010 | Standard Practices for Sampling Water | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | EPA Method 1103.1 | 2010 | Escherichia coli (E. coli) in Water by Membrane Filtration Using membrane-Thermotolerant Escherichia coli Agar (mTEC) | U.S. Environmental Protection Agency |