This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.4360 | ASTM D 6228 | 2003 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1c | 1969 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-70 | 1998 | Lower Torso Assembly, Revision F | General Motors Corporation | |
Research and Special Programs Administration | 49 CFR 179.100-18(c) | AAR Publication | 1982 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix W | Association of American Railroads | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxiv) | ASME B&PV Code | 2002 | Boiler and Pressure Vessel Code, Section XI, Appendix VIII and the supplements to Appendix VIII and Article I-3000 of Section XI of 2002 Addenda through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (43) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA-520-5-84-006 | 1987 | Radiochemistry Procedures Manual | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 11, Section 16.0(2) | NGPA 2265 | 1965 | Tentative Method of Determination of Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas | Natural Gas Producers Association | |
Federal Highway Administration | 23 CFR 625.4(b)(8) | ANSI/AASHTO/AWS D1.5 | 1995 | Bridge Welding Code | American Welding Society | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-11 | 1964 | Specification for L-812 Static Indoor Type Constant Current Regulator Assembly; 4 KW and 7\1/2\ KW, With Brightness Control for Remote Operation | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 101.83(c)(2)(ii)(A)(2) | UUSI Publication | 2000 | Determination of the Sterol Content in Margerines, Halvarines, Dressings, Fat Blends and Sterol Fatty Acid Ester Concentrates by Capillary Gas Chromatography | Unilever United States, Inc. | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1017 | 1986 | Performance Requirements for Temperature Activated Mixing Valves for Primary Domestic Use | American Society of Sanitary Engineering | |
Environmental Protection Agency | 40 CFR 79.61(d)(2)(i) | HHS Publication | 1985 | Guide for the Care and Use of Laboratory Animals | U.S. Department of Health and Human Services | |
Rural Utilities Service | 7 CFR 1755.902(e)(5) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 161.002-1(b) | Lloyd's Publication | 1990 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 80.176(b) | ASTM D 6201 | 2004 | Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC H-22 | 1986 | DC Electric Bilge Pumps Operating Under 50 Volts | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.345(c) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | USGS I-4545-85 | 1985 | Nitrogen, nitrite plus nitrate, total, colorimetric, cadmium reduction-diazotization, automated-segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | EPA Method 300.1 | 2000 | Ion chromatography - anions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(c)(1) | ANSI NGV1 | 2006 | Connection Devices, 2nd edition | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 435.41(e) | ISO 11734 | 1995 | Water Quality: Evaluation of the Ultimate Anaerobic Biodegradability of Organic Compounds in Digested Sludge--Method by Measurement of the Biogas Production | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 91.316(b)(2)(i) | SAE Paper 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(c)(7) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Labor Department | 41 CFR 50-204.2(a)(3) | 14 CFR 103 | 2012 | Transportation of Compressed Gases | U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.135-7(b)(29) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1042.901 2008 Annex VI | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xv) | APHA Method 2550 | 2000 | Temperature | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.2000(b)(2) | RIUIC regulations | 2014 | Rhode Island General Laws, Section 23-19.1-1 et seq., entitled, Hazardous Waste Management | State of Rhode Island | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Appendix A, Section 4.1.1.5.1 | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(i) | EPA-600-4-79-020 | 1983 | Method 202.1--Atomic Absorption: direct aspiration | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
Coast Guard | 46 CFR 119.440(a)(1) Table 119.440(a)(1) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1487 | 2001 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use | ASTM International | |
Coast Guard | 36 CFR 1237.18(b) | ISO 18923 | 2000 | Imaging Materials--Polyester-Base Magnetic Tape--Storage Practices | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 52, Subpart EE | NHSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of New Hampshire | |
Coast Guard | 30 CFR 250.901(d)(3) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 68.115(b)(2)(i) | NFPA 704 | 1996 | Standard System for the Identification of the Hazards of Materials for Emergency Response | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Article 445 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.36(e) | Drawing No. 78051-136 | 1994 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(3) | APHA Method 601 | 2015 | Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI A112.14.1 | 1975 | Backflow Valves | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.1628(d)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Coast Guard | 21 CFR 139.117(a)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C12 | ASTM D 2517 | 2000 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | ASTM International |