This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(64) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(4)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(38) | API MPMS | 2002 | Chapter 10—Sediment and Water, Section 9—Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(39) | API MPMS | 1980 | Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Grav... | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(6) | API MPMS | 2007 | Chapter 2, Section 2A | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(1) | ASTM C 33-07 | 2007 | Standard Specification for Concrete Aggregates | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(i) | ANSI/ASME BPVC | 2019 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(2) | ACI 318R | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(1) | ACI Standard 318-95 | 1995 | Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(55) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1997 | Chapter 11.1, Volume 1, Table 5A, Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 ° | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(86) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(2) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(7) | API MPMS | 1994 | Chapter 1—Vocabulary | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(71) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(20) | API MPMS | 2005 | Chapter 5, Section 5 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(ii) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1902(c) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(52) | API RP 2SK | 2008 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(23) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(87) | ANSI/API Spec. 14A | 2005 | Specification for Subsurface Safety Valve Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(2) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(3) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(60) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | 1986 | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(2) | ASTM C 94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(18) | API MPMS | 2005 | Chapter 5, Section 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(2)(iii)(A) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(67) | API RP 2556 | 2003 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14F | 2008 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(87) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(19) | API MPMS | 2005 | Chapter 5, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | ANSI/API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |