This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(65) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(28) | API MPMS | 2003 | Chapter 9, Section 2 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(6) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(41) | API MPMS | 2009 | Chapter 14, Section 3, Part 3 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B11 | API 1130 | 2002 | Computational Pipeline Monitoring | American Petroleum Institute | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 1090 | API MPMS 14.1–2016 | 2016 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(B)(1) | API 620 | 1966 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | API RP 14FZ | 2013 | Update to Electrical Engineering Regulations | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 52.741(a)(3), True Vapor Pressure | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.459 | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(17) | API MPMS | 1998 | Chapter 4—Proving Systems | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.803(b)(4) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(81) | API Spec. 2C | 2004 | Specification for Offshore Pedestal Mounted Cranes | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(8) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(51) | API RP 2RD | 2009 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs), First Edition, June 1998; reaffirmed, May 2006, Errata, June 2009 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.736 (d)(1) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.440(a) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Interior Department | 88 FR 39514 | 43 CFR 3170 | API RP 49 | 2013 | Onshore Oil and Gas Operations; Federal and Indian Oil and Gas Leases; Codification of Onshore Orders 1, 2, 6, and 7 | American Petroleum Institute |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 60 | API MPMS 14.1 | 2016 | Test Methods and Performance Specifications for Air Emission Sources | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1202(a)(2)(v) | API MPMS | 2013 | Chapter 12, Section 2, Part 3 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 261.1083(c)(3)(ii)(B) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(33) | API MPMS | 2003 | Chapter 9—Density Determination, Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.806(a)(3) | API 6A V1 | 2003 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(34) | API MPMS | 2007 | Chapter 10—Sediment and Water, Section 1—Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.806(a)(3) | API Spec. 6A | 2009 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(59) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Research and Special Programs Administration | 49 CFR 195.205(b)(1) | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.307(a) | API 12F | 1994 | Specification for Shop Welded Tanks for Storage of Production Liquids | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1987 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.1251, Maximum true vapor pressure (1) | API MPMS | 1997 | Evaporative Loss from Floating Roof Tanks, Chapter 19.2 | American Petroleum Institute | |
Coast Guard | 33 CFR 154.814(l)(5) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(50) | API MPMS | 2009 | Chapter 14.5/GPA Standard 2172-09; Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192, Appendix B, II | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.108(d) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Interior Department | 88 FR 6376 | 30 CFR 585 | API RP 2A–WSD | 2000 | Reorganization of Title 30-Renewable Energy and Alternate Uses of Existing Facilities on the Outer Continental Shelf | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 75.6(f)(4) | API MPMS | 2005 | Chapter 22, Section 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1995 | Chapter 3, Section 4 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(ii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(81) | API MPMS | 2008 | Chapter 5—Metering, Section 6—Measurement of Liquid Hydrocarbons by Coriolis Meters; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 265.195(f)(2) Note | API 1632 | 2015 | Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(2) | API 570 | 2016 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.801(e)(4) | API RP 14B | 2005 | Recommended Practice for Design, Installation, Repair, and Operation of Subsurface Safety Valve Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(66) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(29) | API MPMS | 2007 | Chapter 10, Section 1 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a)(1) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute |