DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(9)(ii) | EPA-600-4-79-020 | 1983 | Method 245.2--Automated Cold Vapor Technique | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB (34) | ASTM D 858A | 2007 | Standard Test Methods for Manganese in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec QQ-W-423 | 1969 | Wire, Steel, Corrosion-Resisting | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.156-11(c)(2)(i)(B) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 6 CFR 27.204(a)(2) | NFPA 704 | 2007 | Standard System for the Identification of the Hazards of Materials for Emergency Response | National Fire Protection Association | |
Coast Guard | 46 CFR 162.017-3(r) | ISO 15364 | 2000 | Ships and Marine Technology—Pressure/Vacuum Valves for Cargo Tanks, First Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 155, Appendix A | ANSI B16.5 | 1981 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 21 CFR 131.150(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 164.023-3(b)(7) | MIL-T-43624A | 1982 | Thread, Polyester, Spun | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.01-2(e)(4) | ASTM A 106 | 1995 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IF (Chloroform) | EPA Method 551 | 1990 | Chlorination Disinfection Byproducts, Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(f)(7) | IEEE 100 | 2000 | Dictionary of Electrical and Electronic Terms | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 110.10-1(o)(11) | UL 1042 | 1994 | Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(viii) | ASTM D 792 | 2008 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM International | |
Coast Guard | 21 CFR 184.1133(b) | Food Chemicals Codex | 1981 | Ammonium Alginate | National Academy Press | |
Coast Guard | 46 CFR 58.50-5(a)(4) Table 58.50-5(a) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Coast Guard | 33 CFR 183.540(d) | SAE J-1527 | 1985 | Marine Fuel Hoses | Society of Automotive Engineers | |
Coast Guard | 33 CFR 157.02(b)(7) | IMO Resolution A.744(18) | 1993 | Guidelines on the Enhanced Programme of Inspections During Surveys of Bulk Carriers and Oil Tankers, Annex B sections 1.1.3-1.1.4, 1.2-1.3, 2.1, 2.3-2.6, 3-8, and Annexes 1-10 with appendices | International Maritime Organization | |
Coast Guard | 46 CFR 111.105-27(b) | NFPA 77 | 2000 | Recommend Practice for Static Electricity | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(k)(10) | MSS SP-61 | 2003 | Pressure Testing of Steel Valves | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.30-5(a)(6) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB (24) | APHA Method 4500-CN G | 1998 | Cyanide Amenable to Chlorination after Distillation | American Public Health Association | |
Coast Guard | 46 CFR 56.01-2(e)(38) | ASTM A 520 | 1997 | Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IH (7) | ASTM D 6503 | 1999 | Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (6) | APHA Method 3114 B | 2009 | Arsenic and Selenium Digestion | American Public Health Association | |
Coast Guard | 46 CFR 52.01-1(b)(2) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II, Part A—Ferrous Material Specifications and Part B—Nonferrous Material Specifications | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.29 | 2007 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 27 CFR 21.65(b)(1) 249 | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 63.25-9(c)(1) | IMO MARPOL 73/78 | 1978 | The International Convention for the Prevention of Pollution from Ships (MARPOL 73/78), Annexes I, II, III, and V | International Maritime Organization | |
Coast Guard | 21 CFR 172.723(b)(1) | AOCS Method Cd 9-57 | 1989 | Oxirane Oxygen | American Oil Chemists Society | |
Coast Guard | 46 CFR 113.20-3 | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 199.70(b)(3)(ii) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 40 CFR 60, Appendix A-7, Method 19, Section 12.3.2.4 | ASTM D 1826 | 1977 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Coast Guard | 33 CFR 127.101 | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Coast Guard | 46 CFR 110.10-1(g)(22) | IEC 92-306 | 1980 | Electrical Installation in Ships, Part 306: Equipment-Luminaries and accessories, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 13.307 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
Coast Guard | 33 CFR 154, Appendix A, 3.1 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Coast Guard | 36 CFR 1235.4(e)(3) | ISO 9660 | 1990 | Volume and File Structure of CD-ROM for Informational Exchange | International Organization for Standardization | |
Coast Guard | 46 CFR 114.600(b) | UL 595 | 1991 | Marine Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 134.140(a)(4) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 57.02-4(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 169.703(c)(7)(ii) | NFPA 302 | 1980 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 29 CFR 1910.6(e)(74) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.002-4(d) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 164.008-1(b) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Coast Guard | 46 CFR 167.40-1(a)(3) | IEEE 45 | 1948 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers |