This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 113.30-25(i) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 58.03-1(g)(8) | ASTM D93 | 1997 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Coast Guard | 46 CFR 105.3(c)(1) | UL 19 | 2001 | Standard for Safety—Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.171-17(n) | ASTM D1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 118.425(b) | NFPA 17A | 1994 | Wet Chemcial Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 126.5(b) | NFPA 10 | 1988 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 7 CFR 1755.504(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 63.05-1(c)(1) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 159.4(b) | ASTM E11 | 1995 | Standard Specification for Wire Cloth and Sieves for Testing Purposes1 | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | UL 486A | 1992 | Wire Connectors and Soldering Lugs for Use with Copper Conductors | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.005-4(h) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(ii) | EPA Method 200.8 | 1991 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 116.423(a)(3) | NFPA 701 | 1996 | Fire Tests for Flame-Resistant Textiles and Films | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 1005.0 | 2002 | Sheepshead Minnow, Cryprinodon variegatus, Embryo-larval Survival and Teratogenicity Test Method | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 153.0(a)(1) | IMO Resolution MEPC 18(22) | 1985 | IMO Standards for Procedures and Arrangements for the Discharge of Noxious Liquid Substances | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(c)(3) | Drawing No. 160.055-1B, Sheet 1 | 2012 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 63, Adult | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.01-2(k)(8) | MSS SP-55 | 2001 | Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components-Visual Method | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 33 CFR 154.106(e)(1) | IEC 309-1 | 1988 | Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 1, General Requirements | International Electrotechnical Commission | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | APHA Method 3112 B | 1999 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 160.077-19(c)(15) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.133-3 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IB (2) | USGS I-2030-85 | 1989 | Alkalinity, electrometric automated | U.S. Geological Survey | |
Coast Guard | 46 CFR 114.600(b) | ASTM E84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 189.50-1(a) | NFPA 306 | 1993 | Standard for the Control of Gas Hazards on Vessels To Be Repaired | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(A) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-H-2846 | 1965 | Hooks, Fish, Steel | U.S. Department of Defense | |
Coast Guard | 46 CFR 53.12-1(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(14) | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.151-15(e) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.048-1(a)(2) | FedSpec CCC-C-426D | 1970 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D396 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 1 | 2014 | Sample and Velocity Traverses for Stationary Sources | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.151-33(b) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-8(a)(5) | Federal Standard 191A | 1978 | Method 5762, Mildew Resistance of Textile Materials: Soil Burial Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 45 CFR 162.920(c)(1)(v) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 160.021-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.156-7(b)(3)(iv)(B) | MIL-C-19663D | 1988 | Military Specification, Cloth, Woven Roving, For Plastic Laminate | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.013-3(b) | UL 1191 | 1995 | Standards for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B283 | 1996 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) | ASTM International | |
Coast Guard | 33 CFR 155.1035(c)(5)(i) | OCIMF Publication | 1988 | Ship to Ship Transfer Guide (Petroleum) | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(iii) | ASTM D638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 46 CFR 110.10-1(f)(2) | IEEE Std C37.010 | 1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 110.15-1(b), Nonsparking fan | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 197.204, ANSI Code1 | ANSI B31.1 | 2013 | Code for Pressure Piping | American National Standards Institute |