DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(61) | API RP 14H | 2007 | Recommended Practice for the Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(22) | API MPMS | 2007 | Chapter 6, Section 6 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | ANSI/API Spec 6A | 2010 | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iii) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.919(b)(2) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(17) | API MPMS | 2005 | Chapter 5, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1007(a)(4)(i)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(25) | API MPMS | 2015 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(89) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.836 | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(88) | API RP 86 | 2005 | Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(c) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(5) | ASME B31.8 | 2003 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(3) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(41) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products and Lubricating Oils | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(3) | ASTM C 150-07 | 2007 | Standard Specification for Portland Cement | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.850 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(53) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(25) | API MPMS | 2006 | Chapter 8, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(3) | ACI 357R-84 | 1984 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(57) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(3) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14FZ | 2013 | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(77) | API RP 90 | 2006 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(4) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(63) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(21) | API MPMS | 2007 | Chapter 6, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(9) | API MPMS | 1989 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(73) | API RP 17H | 2013 | Remotely Operated Tools and Interfaces on Subsea Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(g)(2) | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(iv) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1980 | Chapter 11.1, Volume 1, Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Gravity at 60 °F, API Standard 2540 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1904(a) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(15) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(26) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 1—Lease Automatic Custody Transfer (LACT) Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(90) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(l)(1) | AGA Report No. 7 | 2006 | Measurement of Natural Gas by Turbine Meters | American Gas Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(20) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(e) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(6) | ASME SPPE-1 | 1994 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(k)(1) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(42) | API MPMS | 1994 | Chapter 11—Physical Properties Data, Addendum to Section 2, Part 2—Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids | American Petroleum Institute |