DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(7) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(d) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(32) | API MPMS | 1999 | Chapter 10, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | 2001 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | 2004 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(16) | ASTM C 94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(1)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (c) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(14) | API MPMS | 2003 | Chapter 4, Section 6 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(27) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 6—Pipeline Metering Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(b) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(79) | API RP 75 | 2008 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(40) | API MPMS | 2006 | Chapter 14, Section 3, Part 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(f)(1) | ANSI/AISC 360 | 2005 | Specification for Structural Steel Buildings | American Institute of Steel Construction | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(43) | API MPMS | 1995 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(5) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(ii) | API 510 | 2019 | Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.459 | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(51) | API RP 2RD | 2009 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs), First Edition, June 1998; reaffirmed, May 2006, Errata, June 2009 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(5) | API MPMS | 1994 | Chapter 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(3) | AGA Report No. 10 | 2003 | Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases | American Gas Association |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(60) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(1) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.865 (a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(57) | API RP 14E | 2007 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.920(f) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(33) | API MPMS | 2005 | Chapter 10, Section 9 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(12) | API MPMS | 2005 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(76) | API RP 86 | 2005 | API Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(17) | ASTM C 150-07 | 2007 | Standard Specification for Portland Cement | ASTM International | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(2)(iv) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (d) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.108(c) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(15) | API MPMS | 2003 | Chapter 4, Section 7 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(28) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 7—Metering Viscous Hydrocarbons | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(92) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(b) | API 570 | 2016 | Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(80) | API MPMS | 2007 | Chapter 4—Proving Systems, Section 8—Operation of Proving Systems; First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(41) | API MPMS | 2009 | Chapter 14, Section 3, Part 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(3) | ANSI/AISC 360 | 2005 | Specification for Structural Steel Buildings | American Institute of Steel Construction | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(44) | API MPMS | 2003 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2—Measurement Tickets | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(1) | AWS D1.1:2000 | 1999 | Structural Welding Code—Steel | American Welding Society |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(3)(i) | ANSI/ASME BPVC | 2019 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(2) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society |
Safety and Environmental Enforcement Bureau | 30 CFR 250.852(a)(1) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |