DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(4)(v) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(75) | API 2552 | 2007 | Measurement and Calibration of Sphere and Spheroids | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(16) | API MPMS | 1999 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(80) | API RP 2556 | 1993 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(4)(iii) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.735(a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(73) | ANSI/API Spec. 14A | 2006 | Specifications for Subsurface Safety Valve Equipment | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(32) | API MPMS | 2002 | Chapter 9—Density Determination, Section 1—Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(vi) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(84) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 3—Proving Reports; First Edition, reaffirmed 2009; i | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(4) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(3) | ANSI/ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels; Divisions 1 and 2, 2004 Edition; July 1, 2005 Addenda, Divisions 1 and 2, and all Section VIII Interpretations Volumes 54 and 55 | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(1) | AWS D1.1 | 2000 | Structural Welding Code--Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(48) | API MPMS | 2000 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 2—Specification and Installation Requirements | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(i)(2) | NACE RP0176-2003 | 2003 | Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production | National Association of Corrosion Engineers |
Safety and Environmental Enforcement Bureau | 30 CFR 250.855 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.618(b) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(9) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b)(3) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(19) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(9) | API MPMS | 2006 | Chapter 3, Section 1B | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(1) | API 510 | 2014 | Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(65) | API RP 2T | 1997 | Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(6) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(64) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(58) | API RP 14F | 2008 | Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(76) | API 2555 | 2002 | Method for Liquid Calibration of Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(17) | API MPMS | 1998 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(81) | API Spec. 2C | 2004 | Specification for Offshore Pedestal Mounted Cranes | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(22) | AWS D3.6M:1999 | 1999 | Specification for Underwater Welding | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.736 (d)(1) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(19) | API MPMS | 2005 | Chapter 5, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(33) | API MPMS | 2003 | Chapter 9—Density Determination, Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(97) | API Standard 2555 | 1966 | Method for Liquid Calibration of Tanks | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(3) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(85) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method, First Edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(23) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(17) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(2) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(49) | API MPMS | 1992 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters; Part 3—Natural Gas Applications | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(j)(1) | ISO/IEC 17011 | 2004 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies | International Organization for Standardization |
Safety and Environmental Enforcement Bureau | 30 CFR 250.856(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.803(b)(2)(iii)(D) | API 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(56) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |