DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 35.25-10(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.10 | 2000 | Face-to-Face and End-to-End Dimensions of Valves | American Society of Mechanical Engineers | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A5 | 2005 | Standard Methods for Analysis of Oil-Borne Preservatives | American Wood Protection Association | |
Coast Guard | 46 CFR 170.270(c)(3) | ASTM F 1197 | 1994 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 58.03-1(d)(1) | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping | American National Standards Institute | |
Coast Guard | 46 CFR 56.70-5(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 57.04-1 | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 199.05(b) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-reflective Materials on Life-saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(22) | ASTM A 276 | 1998 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(4) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 46 CFR 59.10-5(k) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 172.340(b) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 15.1103(c) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 110.10-1(k)(2) | NEMA Standards Publication ICS 2.3 | 1995 | Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Rated not More Than 600 Volts | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 12.10-3(c) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 33 CFR 154.812(a)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Article 445 | National Fire Protection Association | |
Coast Guard | 46 CFR 130.240(a) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 139.130(b)(3) | ISO 9001:2008(E) | 2008 | International Standard: Quality management systems—Requirements | International Organization for Standardization | |
Coast Guard | 46 CFR 160.002-1(b) | DWG No. F-49-6-1 (Sheet 1A) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 27.101 Fixed Fire-Extinquishing Systems (3) | NFPA 750 | 2003 | Standard on Water Mist Fire Protection Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 28.345(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.052-3(b) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 46 CFR 169.703(c)(5)(i) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-5(b)(4) | Federal Standard 191 | 1978 | Method 5804.1, Weathering Resistance of Cloth: Accelerated Weathering Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 62.25-30(a)(1) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.052-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 169.703(c)(5)(ii) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.171-3(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 62.25-30(a)(2) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.060-5(b) | Drawing No. 160.060-1, Sheet 2 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CYM | U.S. Coast Guard | |
Coast Guard | 33 CFR 154.808(b) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Coast Guard | 46 CFR 160.077-29(c)(5) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 10 CFR 430 Subpart B, App. A, 1.1(ii) | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Coast Guard | 33 CFR 142.39(c) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.133-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-17 | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.047-1(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
Coast Guard | 33 CFR 154, Appendix B, 7.3 | ANSI B16.5 | 1979 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 160.156-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 46 CFR 160.047-1(a)(2) | MIL-B-2766 | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Coast Guard | 21 CFR 136.110(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.01-2(e)(35) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 46 CFR 111.91-1 | ASME A17.1 | 2000 | Part 2 Electric Elevators | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.156-13(d)(4)(iv) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 113.20-3 | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 40 CFR 136.3(a) Table IG (Cyanazine) | EPA Method 629 | 1993 | Cyanazine by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency |