This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | ISO 6683 | 2014 | Earth-moving machinery -- Seat belts and seat belt anchorages -- Performance requirements and tests | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.16 | 2003 | Overhead Hoists (Under-hung) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | NFPA 1231 | 1993 | Water Supplies for Suburban and Rural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 49 CFR 173.3(d)(2)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i) | ASTM B 241 | 1969 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | 1971 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 40 CFR | 2013 | EPA Hazardous Waste Container Regulations | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1430/F 1430M | 2010 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI Addenda B31.10a | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z41.1 | 1967 | Men's Safety Toe Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1928.51(b)(1) | 29 CFR 1928.53 | 2021 | Protective Enclosures for Wheel-type Agricultural Tractors--Test procedures and performance requirements | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.152(d)(3) | NFPA 13 | 1969 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(8) | NFPA 37 | 1970 | Standard for the Installation and use of Stationary Combustion Engines and Gas Turbines | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(3) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1423(c)(4)(i) | ISO 11660-1:2008(E) | 2008 | Cranes—Access, guards and restraints—Part 1: General, 2d ed. | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(1) | ASTM A 370 | 1968 | Methods and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(b)(1) | ACGIH Publication | 1995 | Industrial Ventilation: A Manual of Recommended Practice, 22nd ed. | American Conference of Governmental Industrial Hygienists | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(53) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulphur Fires and Explosions | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1796 | 2009 | Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(4) | ISO 10156-2:2005 (E) | 2005 | Gas cylinders—Gases and Gas Mixtures—Part 2: Determination of Oxidizing Ability of Toxic and Corrosive Gases and Gas Mixtures, First Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(37) | ASTM D 445 | 1965 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(69) | ANSI Z87.1 | 2003 | Practice of Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.253(e)(5)(i) | CGA Publication | 1958 | Specification for Rubber Welding Hose | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.263(k)(2)(i) | NFPA 656 | 1959 | Standard for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.95(h)(5)(iii) | ANSI S3.6 | 1969 | Specifications for Audiometers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.243(e)(1)(i) | 29 CFR 1910.212 | 2014 | Subpart O, Machinery and Machine Guarding, General Requirements for All Machines | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.453(a)(1) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(21) | NFPA 91 | 1961 | Standard for the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(10) | SAE J-321a | 1970 | Fenders for Pneumatic-Tired Earthmoving Haulage Equipment | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(10) | ASME B30.14, Section 14-3.1.2 | 2004 | Side Boom Tractors, Operator Qualifications | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.153(a)(2) | 49 CFR Part 178 | 2014 | Shipping Container Specifications | U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.5 | 2004 | Mobile And Locomotive Cranes | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 71 | 2014 | Central Station Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(10) | ANSI Z90.1 | 2014 | Specifications for Protective Headgear for Vehicular Users | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(4) | NFPA 34 | 1966 | Standard for Dip Tanks Containing Flammable or Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(19) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.107(j)(1) | NFPA 86A | 1969 | Standard for Oven and Furnaces Design, Location and Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(2)(iv) | NFPA 59 | 1968 | Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 478 | 2009 | Standard Specification for In-Service Care of Insulating Line Hose and Covers | ASTM International | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, General service incandescent lamp (22) | ANSI C79.1 | 2002 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(ii) | NFPA 101 | 1970 | Life Safety Code | National Fire Protection Association |