| Energy Department |
87 FR 55090 |
10 CFR 429 |
ANSI/NEMA WD 6-2016 |
2016 |
Energy Conservation Program: Test Procedure for Battery Chargers
|
National Electrical Manufacturers Association |
| Energy Department |
87 FR 55090 |
10 CFR 430 |
ANSI/NEMA WD 6-2016 |
2016 |
Energy Conservation Program: Test Procedure for Battery Chargers
|
National Electrical Manufacturers Association |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
ANSI/NEMA WC 70 |
2009 |
Update to Electrical Engineering Regulations
|
National Electrical Manufacturers Association |
| Energy Department |
87 FR 63588 |
10 CFR 431 |
ANSI/NEMA MG 1-2016 (Revision 1, 2018) |
2016 |
Energy Conservation Program: Test Procedure for Electric Motors
|
National Electrical Manufacturers Association |
| Energy Department |
87 FR 63588 |
10 CFR 429 |
ANSI/NEMA MG 1-2016 (Revision 1, 2018) |
2016 |
Energy Conservation Program: Test Procedure for Electric Motors
|
National Electrical Manufacturers Association |
| Energy Department |
88 FR 36066 |
10 CFR 431 |
ANSI/NEMA MG 1-2016 |
2016 |
Energy Conservation Program: Energy Conservation Standards for Electric Motors
|
National Electrical Manufacturers Association |
| Energy Department |
85 FR 56475 |
10 CFR 429 and 430 |
ANSI/NEMA C82.11-2017 |
2017 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
National Electrical Manufacturers Association |
| Energy Department |
85 FR 56475 |
10 CFR 429 |
ANSI/NEMA C82.11-2017 |
2017 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
National Electrical Manufacturers Association |
| Energy Department |
87 FR 53618 |
10 CFR 430 |
ANSI/NEMA C78.901-2016 |
2016 |
Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps
|
National Electrical Manufacturers Association |
| Energy Department |
85 FR 56475 |
10 CFR 429 |
ANSI/NEMA C78.901-2016 |
2016 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
National Electrical Manufacturers Association |
| Interior Department |
88 FR 39514 |
43 CFR 3170 |
ANSI/NACE MR0175-2021/ISO 15156-1:2020 |
2020 |
Onshore Oil and Gas Operations; Federal and Indian Oil and Gas Leases; Codification of Onshore Orders 1, 2, 6, and 7
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 139.130(b)(3) |
ANSI/ISO/ASQ Q9001-2000 |
2000 |
Quality management systems—Requirements
|
American Society for Quality Control |
| Coast Guard |
|
46 CFR 139.120(d) |
ANSI/ISO/ASQ Q9001-2000 |
2000 |
Quality management systems—Requirements
|
American Society for Quality Control |
| Coast Guard |
|
29 CFR 1917.93(b)(1)(i) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Coast Guard |
|
29 CFR 1917.93(b)(2) |
ANSI/ISEA Z89.1 |
2009 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.93(b)(1)(iii) |
ANSI/ISEA Z89.1 |
2009 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Coast Guard |
|
29 CFR 1917.93(b)(1)(ii) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(9) |
ANSI/ISEA Z89.1 |
2009 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| National Highway Traffic Safety Administration |
|
29 CFR 1917.93(b)(2) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(10) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Coast Guard |
|
29 CFR 1917.93(b)(2) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(11) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(9) |
ANSI/ISEA Z89.1 |
2009 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(32) |
ANSI/ISEA Z89.1 |
2009 |
Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(10) |
ANSI/ISEA Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(33) |
ANSI/ISEA Z89.1 |
2003 |
Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(11) |
ANSI/ISEA Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(34) |
ANSI/ISEA Z89.1 |
1997 |
Personnel Protection—Protective Headwear for Industrial Workers—Requirements
|
International Safety Equipment Association |
| Labor Department |
86 FR 54611 |
29 CFR 1915 |
ANSI/ISEA Z87.1-2010 |
2010 |
Incorporation by Reference; Notice of Corrections
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.102 (b)(i) |
ANSI/ISEA Z87.1-2010 |
2010 |
Occupational and Educational Personal Eye and Face Protection Devices
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(6) |
ANSI/ISEA Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.91(a)(1)(ii) |
ANSI/ISEA Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1917.91(a)(1)(i)(A) |
ANSI/ISEA Z87.1 |
2003 |
Practice for Occupational and Educational Eye and Face Protection
|
International Safety Equipment Association |
| Energy Department |
86 FR 71797 |
10 CFR 430 |
ANSI/ISEA Z358.1-2014 |
2014 |
Energy Conservation Program: Definition of Showerhead
|
International Safety Equipment Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(xiii) |
ANSI/ISEA Z308.1 |
2009 |
Minimum Requirements for Workplace First Aid Kits and Supplies
|
International Safety Equipment Association |
| Energy Department |
85 FR 81341 |
10 CFR 430 |
ANSI/ISEA Standard Z358.1-2014 |
2014 |
Energy Conservation Program: Definition of Showerhead
|
International Safety Equipment Association |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ANSI/ISA–RP12.06.01–2003 |
2003 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ANSI/ISA–60079–18 |
2012 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
ANSI/ISA-RP12.06.01-2003 |
2003 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
ANSI/ISA-RP12.06.01-2003 |
2003 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
ANSI/ISA-RP12.06.01-2003 |
2003 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Labor Department |
89 FR 99085 |
30 CFR 74 |
ANSI/ISA 60079–25 |
2011 |
Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories
|
International Society of Automation |
| Labor Department |
89 FR 99085 |
30 CFR 18 |
ANSI/ISA 60079–25 |
2011 |
Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories
|
International Society of Automation |
| Labor Department |
89 FR 99085 |
30 CFR 74 |
ANSI/ISA 60079–11 |
2014 |
Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories
|
International Society of Automation |
| Labor Department |
89 FR 99085 |
30 CFR 18 |
ANSI/ISA 60079–11 |
2014 |
Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ANSI/ISA 12.12.01–2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(xii) |
ANSI/IESNA RP-7 |
2001 |
Recommended Practice for Lighting Industrial Facilities
|
Illuminating Engineering Society of North America |