| Coast Guard |
|
46 CFR 27.211(e)(2)(v)(B) |
SAE J-1475 |
1984 |
Hydraulic Hose Fittings for Marine Applications
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 56.01-2(l)(1) |
SAE J-1475 |
1996 |
Surface Vehicle Hydraulic Hose Fittings for Marine Applications
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 27.211(e)(2)(v)(A) |
SAE J-1475 |
1984 |
Hydraulic Hose Fittings for Marine Applications
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
46 CFR 175.600(b) Table |
SAE J-1475 |
1984 |
Hydraulic Hose Fittings for Marine Applications
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1037.610(c) |
SAE J-1526 |
1987 |
Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III
|
Society of Automotive Engineers |
| Coast Guard |
|
33 CFR 183.540(c) |
SAE J-1527 |
1985 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
33 CFR 183.540(d) |
SAE J-1527 |
1985 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
33 CFR 183.540(a) |
SAE J-1527 |
1985 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1060.810(b) Table 2 |
SAE J-1527 |
1993 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
33 CFR 183.540(b) |
SAE J-1527 |
1985 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.156-5(g)(1) |
SAE J-1527 |
1993 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1060.515(c) |
SAE J-1527 |
1993 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
33 CFR 183.5(b) |
SAE J-1527 |
1985 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.156-7(b)(8)(ii)(B) |
SAE J-1527 |
1993 |
Marine Fuel Hoses
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1037.810(d)(2) |
SAE J-1594 |
2010 |
Vehicle Aerodynamics Terminology
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.1010(b)(2) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 600.116-12(a) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 600.311-12(k) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 600.011(c)(2) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.501(a)(1) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Federal Trade Commission |
|
16 CFR 309.22(a)(2) |
SAE J-1634 |
1993 |
Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(3) |
SAE J-166 |
1971 |
Trucks and Wagons
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(4) |
SAE J-166 |
1971 |
Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(1)(v) |
SAE J-167 |
2011 |
Protective Frame with Overhead Protection
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-167 |
2010 |
Protective Frame with Overhead Protection
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1003(g) |
SAE J-167 |
1970 |
Protective frame with overhead protection—test procedures and performance requirements
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(4) |
SAE J-168 |
1970 |
Protective Enclosures—Test Procedures and Performance Requirements
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1002(a)(5)(i) |
SAE J-168 |
1970 |
Protective Enclosures--Test Procedures and Performance Requirements
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.2.1 |
SAE J-1703 |
1983 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.13.2 |
SAE J-1703 |
1983 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.106 S5.3.9 |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.106 S6.10.2(a) |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.5.4.1 |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(46) |
SAE J-1703 |
1983 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.2.3(b) |
SAE J-1703 |
1983 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S7.2 |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.10.2(e) |
SAE J-1703 |
1995 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S7.2 |
SAE J-1703 |
1983 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S7.6 |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(45) |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.6.3(a) |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.11.3(b) |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.13.2 |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 600.311-12(j)(4) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.501(a)(2)(ii) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 600.116-12(c) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.501(a)(2)(iii) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.501(a)(2)(iv) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.1010(b)(3) |
SAE J-1711 |
2010 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1866-12(b)(2)(ii) |
SAE J-1711 |
1994 |
Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles
|
Society of Automotive Engineers |