DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number Sort descending | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(b) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(b)(2) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1994 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1994 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(b)(2) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1994 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.118(h)(1)(i) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.1307 | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.104(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.207(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.115(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91.6(b)(2) Table | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1037.810d(d)(1) | SAE J-1252 | 1981 | SAE Wind Tunnel Test Procedure for Trucks and Buses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.1010(b)(1) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(3) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(7)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(7)(ii) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(8)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.301(b) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.305 | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(1) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1066.310(b)(1)(ii) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.28 | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(14) | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(e) | SAE J-1318 | 1988 | Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles | Society of Automotive Engineers | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(11) | SAE J-1318 | 1998 | Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1037.610(c) | SAE J-1321 | 1986 | Joint TMC/SAE Fuel Consumption Test Procedure Type II | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1803-01 Rated Power | SAE J-1349 | 2011 | Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2D1 Headlamp Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2E1 Headlamp Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Types 1A1, 2A1, and 2E1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2B1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Types 1C1and 2C1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2D1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 1A1 Headlamp Dimensional Information | Society of Automotive Engineers |