This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.552(c)(16) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(8) | CGA S-1.1 | 1963 | Safety Release Device Standards-Cylinders for Compressed Gases with 1965 Addenda | Compressed Gas Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-5 | 1963 | Specification for L-847 Circuit Selector Switch, 5,000 Volt 20 Ampere | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.159(a)(2) | NFBU 13 | 1963 | Rules and Regulations of the National Board of Fire Underwriters for Sprinkler Equipment Automatic and Open Systems | National Board of Fire Underwriters | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-5 | 1963 | Specification for L-847 Circuit Selector Switch, 5,000 Volt 20 Ampere | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Shoulder room dimension | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.1(a)(4) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Coast Guard | 46 CFR 160.047-3(c) | MIL-B-2766 | 1962 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(14) | ASTM D 86 | 1962 | Test for Distillation of Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(5) | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(p)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Mine Safety and Health Administration | 30 CFR 77.1109(a) | NFPA Publication | 1962 | Portable Fire Extinguisher Standards | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(2) | USPHS Publication 934 | 1962 | Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 77.1103(a) | NFPA Publication | 1962 | Flammable and Combustible Liquids Standards | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.75 | NCUTLO Code | 1962 | Uniform Vehicle Code, Chapters 10, 11, 12, and 14 | National Committee on Uniform Traffic Laws and Ordinances | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.301(b) | NFPA Handbook | 1962 | Section 9, Installation of Pulverized Fuel Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | 1962 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST CS 242 | 1962 | 1-3/4 inch Thick Steel Doors and Frames | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.67 | CGA G-4 | 1962 | Oxygen | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.68 | CGA G-5.1 | 1961 | Standard for Gaseous Hydrogen Systems at Consumer Sites | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(2) | ANSI O1.1 | 1961 | Safety Code for Woodworking Machinery | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 57.12047 | NIST Handbook 81 | 1961 | Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12F | 1961 | Specification for Small Welded Production Tanks, Fifth Edition | American Petroleum Institute |