This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1915.72(a)(4) | ANSI A14.2 | 1972 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 57.18028(b) | DOI/BOM Instruction Guide No. 2 | 1972 | MSA W-65 Self Rescuer | Bureau of Mines, U.S. Department of Interior | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(iv) | SAE J-396a | 1972 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 170.3(o) | NAS Report | 1972 | A Comprehensive Survey of Industry on the Use of Food Chemicals Generally Recognized as Safe | National Academy of Sciences, National Research Council | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | Industrial Method 129-71W | 1972 | Fluoride in Water and Wastewater | Bran & Luebbe Analyzing Technologies, Inc. | |
Coast Guard | 46 CFR 160.060-1(a)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 57.18028(b) | DOI/BOM Instruction Guide No. 3 | 1972 | Permissible Drager 810 Respirator for Self-Rescue | Bureau of Mines, U.S. Department of Interior | |
Mine Safety and Health Administration | 30 CFR 75.1719-2(c)(2) | IEEE 32 | 1972 | Requirements, Terminology and Test Procedures for Neutral Grounding Devices | Institute of Electrical and Electronics Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(iii) | SAE J-395a | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Track-Type Tractors and Track-Type Front-End Loaders | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-320a | 1972 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 71.700(a) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.337-2(b)(2)(i) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(14) | SAE J-592e | 1972 | Clearance, Side Marker, and Identification Lamps | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5190-3A | 1972 | Model Airport Hazard Zoning Ordinance | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 701.3(c)(2)(iv) | Food Chemicals Codex | 1972 | Food Chemicals Codex, 2nd Edition | National Academy Press | |
Food and Drug Administration | 21 CFR 172.320(b)(2) | NAS/NRC Publication | 1972 | Specifications and Criteria for Biochemical Compounds, 3rd Edition | National Academy of Sciences, National Research Council | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394a | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 62a | 1972 | Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE) | U.S. Department of Housing and Urban Development | |
Housing and Urban Development Department | 24 CFR 3280.705(f)(1) | SAE J-533B | 1972 | Flares for Tubing | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 75.322 | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5190-3A | 1972 | Model Airport Hazard Zoning Ordinance1 | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(ii) Footnote 1 | USACE EM-385-1-1 | 1972 | General Safety Requirements EM 385-1-1, Change 1, No. 21, Para. 18.A.20 | Department of the Army, U.S. Army Corps of Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-S-125B | 1972 | Screening, Insect, Non-Metallic | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(ii) | ANSI A14.2 | 1972 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 2013 | 1972 | Standard Method of Preparing Coal Samples for Analysis | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(D) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 13A, Section 7.1.1.2 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1917.42(h)(1) | ANSI B30.9 | 1971 | Standard for Slings | American National Standards Institute | |
Coast Guard | 33 CFR 67.30-5(a) | MIL-C-25050 | 1971 | Color, Aeronautical Lights and Lighting Equipment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (3)(F) | Federal Test Method Standard 191, Method 5903 | 1971 | Textile Test Methods | Architectural Aluminum Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(79) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(21) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-4(b)(1) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ANSI B114.1 | 1971 | Emblem for Identifying Slow Moving Vehicles | American National Standards Institute | |
Coast Guard | 46 CFR 169.115(c)(4) | FedSpec ZZ-H-451F | 1971 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(22) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electric Apparatus | American National Standards Institute | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 18 | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 17.0(9) | ASTM D 2928 | 1971 | Standard Method for Sampling Stacks for Particulate Matter | ASTM International | |
Coast Guard | 46 CFR 160.023-5(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 75.1107-13(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(2) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods |