This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 445.10 | 40 CFR Part 264 | 2015 | Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills) | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEC 60079–6:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 58 Appendix A, 3.3.4.1 | 40 CFR 50 Appendix Q | 2015 | Reference Method for the Determination of Lead in Particulate Matter as PM10 Collected From Ambient Air | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 7.4.1.2 | CGA S-1.1 | 2015 | Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases | Compressed Gas Association | |
Transportation Department | 85 FR 27810 | 49 CFR 180 | ISO 17871:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(61) | ANSI/API RP 2N | 2015 | “Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions” | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 435.13 Note 9 | EPA Method 1670 | 2015 | Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 87 FR 11934 | 10 CFR 50 | ASME BPVC III, Revision 39 | 2015 | Approval of American Society of Mechanical Engineers' Code Cases | American Society of Mechanical Engineers |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.II.D.C-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (d) | ISO/IEC 17021-1 | 2015 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 2997 | 2015 | Standard Specification for Centrifugally Cast, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe | ASTM International | |
Agriculture Department | 84 FR 28186 | 7 CFR 1728 | ANSI 05.3–2015 | 2015 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | American National Standards Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | CAN/CSA-C22.2 NO. 0-10 (R2015) | 2015 | Update to Electrical Engineering Regulations | Canadian Standards Association |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.VII-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-429g | 2015 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Energy Department | 88 FR 17934 | 10 CFR 431 | ANSI/AWWA E103–2015 | 2015 | Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps | American Water Works Association |
Environmental Protection Agency | 40 CFR 272.1151(a) | MIHWMP | 2015 | State of Michigan Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Michigan | |
Environmental Protection Agency | 40 CFR 268.7(b)(1) | EPA SW-846 | 2015 | Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant resin (1) | ASTM C 581 | 2015 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEEE C37.27–2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 59.505(c) | EPA Method 311 | 2015 | Analysis of Hazardous Air Pollutant Compounds in Paints and Coatings by Direct Injection into a Gas Chromatograph (40 CFR part 63, appendix A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 18056 | 40 CFR 60 | ASTM D2111–10 (2015) | 2015 | New Source Performance Standards Review for Industrial Surface Coating of Plastic Parts for Business Machines | ASTM International |
Federal Highway Administration | 23 CFR 625.4(d)(1)(vii) | AASHTO/AWS D1.5M/D1.5 | 2015 | Bridge Welding Code | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Federal Communications Commission | 47 CFR 2.1041(b) | ANSI C63.26-2015 | 2015 | American National Standard of Procedures for Compliance Testing of Transmitters Used in Licensed Radio Services | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 445.10 | 40 CFR Part 265 | 2015 | Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills). | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEC 60079–7:2015 | 2015 | Update to Electrical Engineering Regulations | International Electrotechnical Commission |
Environmental Protection Agency | 85 FR 41100 | 40 CFR 63 | ASTM D2369-10(2015)e1 | 2015 | NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn... | ASTM International |
Environmental Protection Agency | 40 CFR 265.192(e) Note | ANSI B31.3 | 2015 | Petroleum Refinery System | American National Standards Institute | |
Transportation Department | 85 FR 27810 | 49 CFR 180 | ISO 21172–1:2015(E) | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Nuclear Regulatory Commission | 87 FR 65128 | 10 CFR 50 | ASME OM Code Case OMN–28 | 2015 | American Society of Mechanical Engineers 2019-2020 Code Editions | American Society of Mechanical Engineers |
Federal Trade Commission | 80 FR 71689 | 16 CFR 500.19 | National Institute of Standards and Technology (NIST) Handboo... | 2015 | Checking the Net Contents of Packaged Goods, Appendix E—General Tables of Units of Measurements | National Institute of Standards and Technology, U.S. Department of Commerce |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEEE C37.27—2015 | 2015 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.II.D.M-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Transportation Department | 85 FR 8104 | 49 CFR 191 | API RP 1170 | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Energy Department | 87 FR 63588 | 10 CFR 429 | IEC 60079-7:2015 | 2015 | Energy Conservation Program: Test Procedure for Electric Motors | International Electrotechnical Commission |
Transportation Department | 85 FR 27810 | 49 CFR 173 | ISO 11118:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Agriculture Department | 84 FR 28186 | 7 CFR 1728 | AWPA A6–15 | 2015 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | American Wood Protection Association |
Environmental Protection Agency | 87 FR 31185 | 40 CFR 63 | ASTM D4282-02(2015) | 2015 | National Emission Standards for Hazardous Air Pollutants: General Provisions; Technical Correction | ASTM International |
Energy Department | 82 FR 59947 | 10 CFR 851 | ASME BPVC.VIII.1-2015 | 2015 | Worker Safety and Health Program | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 272, Subpart XX | WVHWMP | 2015 | State of West Virginia Hazardous Waste Management Program (Reserved) | State of West Virginia | |
Energy Department | 87 FR 65856 | 10 CFR 429 | ANSI/ASHRAE 29-2015 (R2018) | 2015 | Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers | American National Standards Institute |
Environmental Protection Agency | 40 CFR 268.7(c)(2) | EPA SW-846 | 2015 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435 Appendix 8, Subpart A | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 88 FR 10468 | 40 CFR 770 | BS EN ISO 12460–5:2015 E | 2015 | Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products | British Standards Institution |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 41100 | 40 CFR 63 | ASTM D2111-10(2015) | 2015 | NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn... | ASTM International |