This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Consumer Product Safety Commission | 16 CFR 1211.40 (b)(1) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 4468 | 2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.73a(c)(2)(ii) | ASTM E 1584 | 2011 | Standard Test Method for Assay of Nitric Acid 2011 EPA/AP | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.5580 | ASTM D6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Energy Department | 87 FR 51200 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for External Power Supplies | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 60.17(o)(1) | TAPPI Method T624 | 2011 | Gross Heating Value of Black Liquor | Technical Association of the Pulp and Paper Industry | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Environmental Protection Agency | 40 CFR 1065.1010(b)(42) | ASTM D 6615 | 2011 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1042 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
Energy Department | 85 FR 50757 | 10 CFR 430 | IEC 62301 Ed. 1.0 b:2005 | 2011 | Energy Conservation Program: Test Procedures for Cooking Products | International Electrotechnical Commission |
Federal Trade Commission | 92 FR 20788 | 16 CFR 460.5 (e)(2)(viii) | ASTM C 1363-11 | 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Engineers Corps | 33 CFR 222.3(d)(2) | ANSI C2 | 2012 | National Electrical Safety Code | American National Standards Institute | |
Coast Guard | 46 CFR 160.077-21(c)(5)(i) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(5) | ASTM D 445 | 2012 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 1051.501(d)(1) | 40 CFR 1065, Subpart H | 2012 | Engine Fluids, Test Fuels, Analytical Gases and Other Calibration Standards | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.2201(b)(1)(i) | TXHWMP | 2012 | EPA-Approved Texas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Texas | |
Coast Guard | 46 CFR 160.060-1(a)(4) | 46 CFR 164.013 | 2012 | Foam, Unicellular Polyethylene (Buoyant, Slab, Silted Trigonal Pattern) | U.S. Coast Guard | |
Environmental Protection Agency | 88 FR 10468 | 40 CFR 770 | ANSI A135.5–2012 | 2012 | Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products | American National Standards Institute |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-334a | 2012 | Protective Frame Test Procedures and Performance Requirements | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.4211(f)(2)(ii) | NAERC EOP-002-3 | 2012 | Capacity and Energy Emergencies | North American Electric Reliability Corporation | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 Note 2 | ASTM D 1267 | 2012 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 160.002-4(c)(1) | DWG No. F-49-6-5 (Sheet 2) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | SAE All Standards | 2012 | All specifications, standards and codes without specific reference | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.052-5(c) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 600.113-12(f)(2)(i) | ASTM D 1298 | 2012 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 79 | ASTM D445–12 | 2012 | Fuels Regulatory Streamlining | ASTM International |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(3) | 14 CFR 103 | 2012 | Transportation of Compressed Gases | U.S. Department of Transportation | |
Minerals Management Service | 30 CFR 250.1900(a) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(3) | ASTM D 130 | 2012 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test | ASTM International | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(iv) | AOCS RP Cd Id-92 | 2012 | Iodine Value of Fats and Oils, Cyclohexane -- Acetic Acid Method | American Oil Chemists Society | |
Coast Guard | 46 CFR 160.005-4(c)(1) | Drawing No. 160.005-1 (Sheet 5) | 2012 | Pad Detail (Child) | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.506(ee) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(27) | ASTM D 3237 | 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy | ASTM International | |
Coast Guard | 46 CFR 160.049-4(d) | Drawing No. 160.049-1 | 2012 | Buoyant Cushion, Plastic Foam | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 1066.501(a)(1) | SAE J-1634 | 2012 | Battery Electric Vehicle Energy Consumption and Range Test Procedure | Society of Automotive Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21983 | 30 CFR 250.739 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63.1571(a)(6)(ii)(B) | ASTM D6348-12e1 | 2012 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1958/F 1958M | 2012 | Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International |