This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(2) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 85 FR 17244 | 40 CFR 60 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills Residual Risk and Technology Review | ASTM International |
Environmental Protection Agency | 40 CFR 435.13 Note 11(b) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(6) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C78.21–2011 (R2016) | 2011 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 60 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 12 | 2011 | Carbon Dioxide Fire Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 11(b) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 55.14(d)(22)(i) | 40 CFR part 52, subpart VV | 2011 | Outer Continental Shelf Air Regulations Consistency Update for Virginia | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Public Health Service | 42 CFR 37.10(f)(5) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
Federal Communications Commission | 47 CFR 80.1101(c)(11)(v) | 47 CFR 80.1063 | 2011 | Special requirements for INMARSAT-E EPIRB stations | Federal Communications Commission | |
Food Safety and Inspection Service | 45 CFR 162.920(d)(1) | NACHA Publication | 2011 | 2011 NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network, NACHA Operating Rules, Appendix One: ACH File Exchange Specifications (Operating Rule 59) | National Automated Clearing House Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(ix) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 87 FR 33316 | 10 CFR 431 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(xiv) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 17244 | 40 CFR 63 | ASTM D6522–11 | 2011 | National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills Residual Risk and Technology Review | ASTM International |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(44) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (viii) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 87 FR 33316 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedures for Residential and Commercial Clothes Washers | International Electrotechnical Commission |
Environmental Protection Agency | 85 FR 63394 | 40 CFR 61 | ASTM D 2369– 10 | 2011 | Test Methods and Performance Specifications for Air Emission Sources | ASTM International |
Energy Department | 88 FR 66152 | 10 CFR 429 | ANSI/AHRI 1320–2011 (I– P) | 2011 | Energy Conservation Program: Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers | Air Conditioning, Heating, and Refrigeration Institute |
Agriculture Department | 87 FR 26961 | 7 CFR 1728 | RUS Bulletin 1728H–701 | 2011 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers; Correction | U.S. Department of Agriculture |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
Federal Highway Administration | 23 CFR 625.4(b)(6) | D1.4/D1.4M | 2011 | Structural Welding Code-Reinforcing Steel | American Welding Society | |
Environmental Protection Agency | 40 CFR 435.11(o) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(86) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.41(q) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 3234 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Dishwashers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.176(a) | Drawing No. 420-5000 | 2011 | Complete leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 5 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1450.3 (a) | ANSI/APSP-16 | 2011 | Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(3) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62040–3 Ed. 2.0 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |