This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | Greenhouse Gas Emissions Model (GEM) version 2.0.1 | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | U.S. Environmental Protection Agency |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
Coast Guard | 45 CFR 162.1603(b) | CAQH Publication | 2011 | ACME Health Plan, CORE v5010 Master Companion Guide Template, 005010, 1.2 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24640C with Supplement 1 | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Coast Guard | 45 CFR 162.920(c)(3)(iv) | CAQH Publication | 2011 | Phase II CORE 260: Eligibility & Benefits Data Content (270/271) Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
Public Health Service | 42 CFR 37.10(f)(5) | DICOM Standard PS 3.12-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange | National Electrical Manufacturers Association | |
Federal Communications Commission | 47 CFR 80.1101(c)(11)(v) | 47 CFR 80.1063 | 2011 | Special requirements for INMARSAT-E EPIRB stations | Federal Communications Commission | |
Environmental Protection Agency | 40 CFR 435.41(ff) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(ix) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.14(g)(32) | ASTM D 2908 | 2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | IITRI All Standards | 2011 | All specifications, standards and codes without specific reference | IIT Research Institute | |
Environmental Protection Agency | 40 CFR 435.13 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 16 | 2011 | Foam Water Spray Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (viii) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.15 Note 8 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 6357 | 2011 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 3246 | 2011 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulemetry | ASTM International | |
Health and Human Services Department | 45 CFR 162.1203(a)(7) | CAQH Publication | 2011 | Phase II CORE 258: Eligibility and Benefits 270/271 Normalizing Patient Last Name Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3262 | 2011 | Standard Specification for, Fiberglass, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.200(h)(2) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Energy Department | 86 FR 56608 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Clothes Dryers | International Electrotechnical Commission |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | MIL–DTL–24643C (as updated by Supplement 1A) | 2011 | Update to Electrical Engineering Regulations | U.S. Department of Defense |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Health and Human Services Department | 45 CFR 170.202(b) | ONC XDR/XDM for Direct Messaging v1.0 | 2011 | ONC XDR and XDM for Direct Messaging Specification | Office of the National Coordinator for Health Information Technology | |
Health and Human Services Department | 45 CFR 162.1403(a)(1) | CAQH Publication | 2011 | Phase II CORE 250: Claim Status Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 85 FR 56475 | 10 CFR 429 and 430 | IEC 62301 2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 69 | EPA Method 1627 | 2011 | Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(x) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.176(a) | Drawing No. 420-5000 | 2011 | Complete leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 31102 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |