This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Railroad Administration | 49 CFR 229.51(a)(1) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(21) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Food and Drug Administration | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-4(b)(1) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.124(b)(4)(iv) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.7.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(22) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electric Apparatus | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 17.0(9) | ASTM D 2928 | 1971 | Standard Method for Sampling Stacks for Particulate Matter | ASTM International | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.023-5(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(38) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(50) | ANSI Z9.1 | 1971 | Practices for Ventilation and Operation of Open-Surface Tanks | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(2) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.1810(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.222 S6.6.2 | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Coast Guard | 40 CFR 136.3(a) Table IB Footnote 18 | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 61.18(a)(10) | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.21(d) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.301 S7.1.1 | ASTM D 484 | 1971 | Standard Specifications for Hydrocarbon Dry Cleaning Solvent | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(39) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-475A | 1971 | Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Federal Railroad Administration | 49 CFR 229.51(b) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB (38) | EPA Method 352.1 | 1971 | Nitrate Nitrogen - Brucine | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(6) | ANSI/NFPA 1971 | 1971 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior |