Rural Utilities Service |
|
7 CFR 1755.910(e)(3)(vi) |
ASTM D610 |
1989 |
Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
|
ASTM International |
Consumer Product Safety Commission |
|
16 CFR 1203.53(a)(1) |
ANSI Z90.4 |
1984 |
Protective Headgear for Bicyclists
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (5) |
EPA Method 619 |
1993 |
Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.852(a)(5) Table |
APHA Method 9221 B |
1998 |
Multiple Tube Fermentation Qualitative (LTB): Total Coliform
|
American Public Health Association |
Coast Guard |
|
46 CFR 160.176-4(b)(3) |
Federal Standard 191A |
1978 |
Method 5134, Strength of Cloth, Tearing: Tongue Method
|
Federal Specifications Standards and Test Methods |
Research and Special Programs Administration |
|
45 CFR 162.1202(b)(2)(ii) |
ASC X12N 270/271 |
2008 |
Health Care Eligibility Benefit Inquiry and Response, Version 4010
|
Washington Publishing Company |
Environmental Protection Agency |
|
40 CFR 98.464(b)(4)(i)(E) |
APHA Method 2540 G |
2015 |
Total, Fixed, and Volatile Solids in Solid and Semisolid Samples NDG
|
American Public Health Association |
Occupational Safety and Health Administration |
|
29 CFR 1915.156(b)(2) |
ANSI Z41 |
1991 |
Protective Footwear
|
American National Standards Institute |
Rural Utilities Service |
|
7 CFR 1755.390(k)(2)(i) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Tetrachloroethylene) |
EPA Method 551.1 |
1995 |
Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection
|
U.S. Environmental Protection Agency |
Coast Guard |
|
40 CFR 136.3(a) Table IA |
APHA Method 9221 B |
2006 |
Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
Coast Guard |
|
46 CFR 160.052-1(a)(4) |
46 CFR 164.015 |
2012 |
Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes
|
U.S. Coast Guard |
Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(ii) |
ASTM D3370 |
2008 |
Standard Practices for Sampling Water
|
ASTM International |
Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(3)(ii) |
ISO 1183-1:2004(E) |
2004 |
Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (36) |
EPA Method 200.5 |
2003 |
Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 194.22(b) |
ASME NQA-3 |
1989 |
Quality Assurance Program Requirements for the Collection of Scientific and Technical Information for Site Characterization of High-Level Nuclear Waste Repositories
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(36) |
ANSI H23.1 |
1970 |
Seamless Copper Water Tube Specification
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.182(a) |
Drawing No. 175-1000 |
2009 |
Head Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(i) |
ASTM D1137 |
1975 |
Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.425(i)(2) |
ASTM E515 |
1995 |
Standard Test Method for Leaks Using Bubble Emission Techniques
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 52, Subpart SS |
TXSIP |
1979 |
State Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Texas |
Coast Guard |
|
46 CFR 161.002-1(b) |
UL 521 |
1994 |
Heat Detectors for Fire Protective Signaling Systems
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 136.3(b)(24)(ii) |
Mitchell Method M5331 |
2008 |
Determination of Turbidity by Nephelometry. Revision 1.0
|
Leck Mitchell |
Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.141 Table A |
Drawing No. 210-3000 |
2001 |
Upper/Lower Torso Assembly
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 63.654(c)(3) |
TCEQ Sampling Procedures Manual |
2003 |
Appendix P: Cooling Tower Monitoring, Air Stripping Method (Modified El Paso Method) for Determination of Volatile Organic Compound Emissions from Water Sources, Revision Number One
|
Texas Commission on Environmental Quality |
Coast Guard |
|
46 CFR 160.077-21(c)(5)(i) |
UL 1517 |
2012 |
Hybrid Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
Research and Special Programs Administration |
|
45 CFR 162.1603(a)(3) |
CAQH Publication |
2012 |
Phase III 360 CORE Uniform Use of CARCs and RARCs (835) Rule, version 3.0.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH (5) |
APHA Method 9222 G |
1997 |
Membrane Filtration Qualitative (LES Endo): Total Coliform
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Busan 40 [Potassium N-hydroxymethyl-N-methyldithiocarbamate]) |
EPA Method 630.1 |
1993 |
Dithiocarbamate Pesticides by GC/ELCD
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 282.92(d)(1)(i)(B) |
TNUSTP |
1998 |
Tennessee Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Tennessee |
Coast Guard |
|
46 CFR 111.60-13(a) |
NEMA Publication WC-3 |
1992 |
Rubber Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy, Revision 1, February 1994
|
National Electrical Manufacturers Association |
Environmental Protection Agency |
|
40 CFR 60.46(c)(2) |
ASTM D2015 |
1978 |
Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter
|
ASTM International |
Consumer Product Safety Commission |
|
16 CFR 1211.10 (d) |
UL 746C |
2004 |
Standard for Safety: Polymeric Materials—Use in Electrical Equipment Evaluations
|
Underwriters Laboratories, Inc. |
Public Health Service |
|
42 CFR 37.51(c) |
ILO Publication |
2011 |
Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses
|
International Labor Organization |
National Highway Traffic Safety Administration |
|
49 CFR 572.15(b) |
Drawing No. SA 103C 010 |
1976 |
Head Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(g)(18)(iii) |
ANSI B31.1.0 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 3285.4(e)(2) |
ASTM D1586 |
1999 |
Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(12) |
CGA Publication |
1958 |
CGA and RMA Specification for Rubber Welding Hose
|
Compressed Gas Association |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.26(c) |
SAE J-594 |
2003 |
Reflex Reflectors
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.100(b)(1)(iii) |
ANSI Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |
Coast Guard |
|
46 CFR 56.50-105 Table |
ASTM A182/A 182M |
1997 |
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
ASTM International |
Mine Safety and Health Administration |
|
30 CFR 56.14131(d) |
SAE J-386 |
1993 |
Operator Restraint Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
Energy Department |
|
10 CFR 430.2, Definitions, Colored incandescent lamp (1) |
CIE 13.3 |
1995 |
Technical Report: Method of Measuring and Specifying Colour Rendering Properties of Light Sources
|
International Commission on Illumination |
Coast Guard |
|
46 CFR 111.105-31(n)(2) |
ABS Publication |
2003 |
Rules for Building and Classing Steel Vessels
|
American Bureau of Shipping |
Coast Guard |
|
46 CFR 25.45-2(b)(3)(ii) |
ABYC A-1 |
1978 |
Marine Liquefied Petroleum Gas Systems
|
American Boat and Yacht Council |
Energy Department |
|
10 CFR 434.701.1 RS-16 |
ARI 340/360 |
1993 |
Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (RS-16)
|
Air Conditioning and Refrigeration Institute |
Food and Drug Administration |
|
21 CFR 131.149(c)(2) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (28) |
ASTM D5812 |
2002 |
Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Iron) |
APHA Method 3120 B |
1998 |
Metals by Inductively Coupled Plasma
|
American Public Health Association |