This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 114.600(b) | NFPA 17 | 1994 | Dry Chemical Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(iii) | Drawing No. 78051-43 | 1987 | Upper leg assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 11.1.1 | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192, Appendix B, II | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3280.714(a)(1)(i) | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 62.16050 Table 2 | ANSI/ASME PTC-19.10-1981 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 179 | 2012 | Specifications for Tank Cars | U.S. Department of Transportation | |
Coast Guard | 40 CFR 94.5(a)(2) | ASTM D 93 | 2002 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | ASTM D 7573 | 2009 | Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | ASTM D 6508 | 2000 | Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte, Revision 2 | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b)(1) | Federal Standard 191 | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.3(c) B17 | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AHA A135.6 | 1990 | Hardboard Siding | American Hardboard Association | |
Environmental Protection Agency | 40 CFR 1043.30(e)(1) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(V) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | ASTM D 4190 | 1982 | Metals by Direct Current Plasma | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(19) | SAE J-1979 | 1997 | E/E Diagnostic Test Modes | Society of Automotive Engineers | |
Coast Guard | 46 CFR 95.01-2(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 182.440 Table 182.440(a)(1) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Energy Department | 10 CFR 431.15(b)(1)(i) | NEMA MG-1 | 1993 | Motors and Generators, Section I, Part 1 | National Electrical Manufacturers Association | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F 1292 | 2004 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1201 | 1993 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above Zero Degrees F | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(16) | EPA Method 548 | 1990 | Determination of Endothall in Drinking Water by Aqueous Derivatization, Liquid-Solid Extraction, and Gas Chromatography with electron-Capture Detection | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 176.27(b) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M030 | 1994 | Shoulder-thorax assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.50-70(a)(2) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.2200(b)(2)(i) | TXUIC regulations | 2014 | Vernon's Texas Codes Annotated, Government Code Title 10, Chapters 2001, 552, and 311 | State of Texas | |
Environmental Protection Agency | 40 CFR 63, Subpart II, Appendix A, Footnote 1 | EPA-340-1-86-016 | 1974 | A Guide for Surface Coating Calculation | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.13 Note 5 | EPA Method 1654 | 2015 | PAH Content of Oil by High-Performance Liquid Chromatography with an Ultra-Violet Absorption Detector, Revision A | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.20 | 2000 | Automatic Gas Ignition Systems and Components with Addendum Z21.20A-2000 | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 76.4(c)(1) | ASME PTC 4.2 | 1991 | Test Code for Coal Pulverizers | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.1628(d)(3) | API RP 14E | 2000 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
National Highway Traffic Safety Administration | 9 CFR 317.309(c)(7)(ii) | FAO/WHO Publication | 1990 | Protein Quality Evaluation Report | Joint FAO/WHO Expert Consultation on Protein Quality Evaluation | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.114(a) | ASTM D 86 | 1978 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 160.151-27(c)(7) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.890(k)(8)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (n-Amyl alcohol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (85) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl D | 2000 | Chlorine, Amperometric direct | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 115, 2.1.6 | EPA-520-5-85-0029 | 1986 | Radon Flux Measurements on Gardinier and Royster phosphogypsum Piles Near Tampa and Mulberry, Florida; Hartley, J.N. and Freeman, H.D. | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 161.173(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 98.324(e)(3) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.03-1(g)(9) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 21 CFR 177.1020(b) | FDA Publication | 1989 | Analysis of Cycopaco Resin for Residual b-(2-Hydroxyethyl mercapto) propionitrile | Food and Drug Administration, U.S. Department of Health and Human Services | |
Rural Utilities Service | 7 CFR 1724.55(a)(1)(i) | FEMA 93 | 1979 | Federal Guidelines for Dam Safety | Federal Emergency Management Agency | |
Coast Guard | 46 CFR 126.160(a) | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (22) Selenium | ASTM D 3859B | 1998 | Standard Test Methods for Selenium in Water, Graphite Furnace AAS | ASTM International | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International |