This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.131(d)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(viii) | EPA Method 0011 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.124 | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.32(b) | Drawing No. 78051-383X | 1995 | Neck Transducer Structural Replacement | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (70) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.316(a)(4) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Food and Drug Administration | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. D, 2.1 | AHAM HLD-1 | 1974 | AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 184.240(c)(3) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.3 | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 78.17-75(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(c) | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Coast Guard | 21 CFR 172.712(b) | Food Chemicals Codex | 1996 | 1,3-Butylene Glycol | National Academy Press | |
Coast Guard | 46 CFR 164.018-5(a)(5) | Federal Test Method Standard 141A | 1974 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling, and Testing, Method 6142, Scrub Resistance | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.170-15(e) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxvii) | ASTM D 1889 | 2000 | Standard Test Method for Turbidity of Water (Withdrawn 2007) | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | OECD No. 102 | 1995 | Guidelines for the Testing of Chemicals, Melting Point/Melting Range | Organization for Economic Cooperation and Development | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Mine Safety and Health Administration | 30 CFR 57.6201(b)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 761.19(a)(14) | ASTM D 3178 | 1984 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coke and Coal | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.507(b)(1) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(m)(5)(iii) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 90.7(b)(2) Table | SAE Paper 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.146(c) | Part No. 210-0000 | 2001 | Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) table IG (Norflurazon) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart F | CAHWMP | 2014 | State of California Hazardous Waste Management Program (Reserved) | State of California | |
Mine Safety and Health Administration | 30 CFR 75.1107-4(b) | NFPA 72A | 1967 | Installation, Maintenance, and Use of Local Protective Signaling Systems | National Fire Protection Association | |
Coast Guard | 29 CFR 1915.155(b)(2) | ANSI Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1095(b) | Food Chemicals Codex | 1981 | Sulfuric Acid | National Academy Press | |
Environmental Protection Agency | 40 CFR 86.1868-12(h)(5) | SAE J-2765 | 2008 | Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench | Society of Automotive Engineers | |
Coast Guard | 33 CFR 157.02(b)(3) | IMO Resolution A.586(14) | 1985 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 12, Section 7.1.1 | ASTM D 2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Coast Guard | 46 CFR 160.010-5(b)(3) | MIL-P-21929B | 1969 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 33 CFR 127.003(b) | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 184.1924(b) | Food Chemicals Codex | 1981 | Urease Enzyme Preparation from Lactobacillus Fermentum | National Academy Press | |
Federal Railroad Administration | 49 CFR 232.603(a)(6) | AAR S-4250 | 2004 | Performance Requirements for ITC Controlled Cable-Based Distributed Power Systems, Version 2.0 | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (18) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 141.852(c)(4)(ii) | Readycult® | 2007 | Readycult® Coliforms 100 Presence/Absence Test for Detection and Identification of Coliform Bacteria and Escherichia coli in Finished Waters, Version 1.1. | Merck KGaA | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(d) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Energy Department | 10 CFR 431.64(c)(3) | AHAM HRF-1 | 2004 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Rural Utilities Service | 7 CFR 1755.902(m)(8) | ASTM B 736 | 2000 | Standard Specification for Aluminum, Aluminum-Alloy and Aluminum-Clad Steel Cable Shielding Stock | ASTM International |