Environmental Protection Agency |
|
40 CFR 63.14(k)(9) |
CASCAQMD Publication |
2002 |
Guidelines for Demonstrating Equivalency with District Approved Transfer Efficient Spray Guns
|
State of California, South Coast Air Quality Management District's |
Energy Department |
|
10 CFR 430 Subpart B, App. F, 4.1 |
ANSI/AHAM RAC-1 |
2008 |
Room Air Conditioners
|
Association of Home Appliance Manufacturers |
Coast Guard |
|
46 CFR 162.050-4(c)(1) |
ISO 8217 |
2005 |
Petroleum products—Fuels (class F)—Specifications of marine fuels
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (23) |
ASTM D7511 |
2009 |
Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.21(f)(3) Note |
IDEXX Colisure Test |
1994 |
Detect coliforms/E. coli with the convenience of a long-read window
|
IDEXX Laboratories |
Environmental Protection Agency |
|
40 CFR 799.9370(h)(18) |
OECD No. 414 |
1983 |
Guidelines for Testing of Chemicals, Teratogenicity
|
Organization for Economic Cooperation and Development |
Environmental Protection Agency |
|
40 CFR 60.17(g)(140) |
ASTM D3792 |
1991 |
Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.200(a)(1) |
ARUIC regulations |
1976 |
Arkansas Water and Air Pollution Control Act, Act 472 of 1949 as amended, Arkansas Statutes Annotated sections 82-1901 through 82-1943
|
State of Arkansas |
Rural Utilities Service |
|
7 CFR 1755.860(i)(4)(iv) |
ASTM B193 |
1987 |
Standard Test Method for Resistivity of Electrical Conductor Materials
|
ASTM International |
Food and Drug Administration |
|
21 CFR 137.190 |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Toxaphene) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.2) |
EPA SW-846 |
1987 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 80.47(m)(6) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.485(g)(6) |
ASTM D4809 |
1995 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(v)(1) |
TFI M-1 |
1961 |
Standards for the Storage and Handling of Agricultural Anhydrous Ammonia
|
Fertilizer Institute |
Coast Guard |
|
46 CFR 160.052-3(b) |
Federal Standard 191 |
1978 |
Textile Test Method 5610
|
Federal Specifications Standards and Test Methods |
National Highway Traffic Safety Administration |
|
49 CFR 572.173(b)(1)(iii) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Housing and Urban Development Department |
|
24 CFR 3282.12(b)(3)(i)(B)(3) |
SBCCI Standard Mechanical Code |
2013 |
Standard Mechanical Code
|
Southern Building Code Congress International |
National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(5) |
Drawing No. SA 150 M060 |
1994 |
Pelvis and Abdomen Assembly
|
Reprographic Technologies |
Coast Guard |
|
46 CFR 120.340(i) |
UL 486A |
1992 |
Wire Connections and Soldering Lugs for Use With Copper Conductors
|
Underwriters Laboratories, Inc. |
Energy Department |
|
10 CFR 430.3(c)(19) |
ANSI Z21.88 |
2009 |
Vented Gas Fireplace Heaters, Fifth Edition
|
American National Standards Institute |
Energy Department |
|
10 CFR 434.701.1 RS-8 |
ASTM C976 |
1990 |
Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8)
|
ASTM International |
Health and Human Services Department |
|
45 CFR 162.1802(b)(2)(iv) |
ASC X12N 837 |
2000 |
Health Care Claim: Institutional
|
Washington Publishing Company |
National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(26) |
ASTM E4 |
2003 |
Standard Practices for Force Verification of Testing Machines
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (35) |
APHA Method 6630 C |
2000 |
Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
APHA Method 4500-SO4(2-) C |
1995 |
Sulfate, Gravimetric Method with Ignition of Residue
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63.2354(b)(3)(ii)(B) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.137(a)(2)(i), Table I-2 Note |
ASTM D1050 |
2005 |
Standard Specification for Rubber Insulating Line Hose
|
ASTM International |
Coast Guard |
|
40 CFR 136.3(a) Table IB (4) |
Method 4500-NH3 B |
1997 |
Ammonia Nitrogen Distillation
|
American Public Health Association |
Research and Special Programs Administration |
|
49 CFR 195.205(b)(1) |
API 650 |
1998 |
Welded Steel Tanks for Oil Storage
|
American Petroleum Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(10)(iv), Table H-26 |
ASME B&PV Code |
1962 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (36) |
EPA Method 1625 B |
1990 |
Semivolatile Organic Compounds by Isotope Dilution GC/MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 5 |
APHA Standard Methods, 19th Edition |
1995 |
Standard Methods for the Examination of Water and Wastewater. 19th Edition
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.4360 |
ASTM D6228 |
1998 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
Coast Guard |
|
46 CFR 54.01-18(b)(5) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 60.17(g)(114) |
ASTM D2986 |
1971 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 571.108 S14.5.3.2 |
ASTM C150 |
1956 |
Standard Specification for Portland Cement
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(10) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators (Inspector's Manual)
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
CABO Model Energy Code |
1992 |
Model Energy Code
|
Council of American Building Officials |
Research and Special Programs Administration |
|
49 CFR 172.519(d)(2)(i) |
ASTM G23 |
1969 |
Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials
|
ASTM International |
Coast Guard |
|
33 CFR 142.39(a) |
ANSI Z88.2 |
1980 |
Respiratory Protection
|
American National Standards Institute |
Coast Guard |
|
40 CFR 136.3(a) Table IE (5) |
ASTM D2460 |
1990 |
Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 62.15265(a)(3) |
ASME PTC 4.1 |
1964 |
Test Code for Steam Generating Units
|
American Society of Mechanical Engineers |
Coast Guard |
|
46 CFR 62.05-1(b) |
ABS Publication |
2003 |
Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery
|
American Bureau of Shipping |
Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(2)(ii) |
ISO 14125:1998(E) |
1998 |
Fibre-reinforced plastic composites—Determination of flexural properties, First Edition
|
International Organization for Standardization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (37) |
TJAC Method AES 0029 |
1991 |
Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes
|
Thermo Jarrell Ash Corp. |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (11) Conductivity |
APHA Method 2510 B |
1997 |
Conductivity, Laboratory Method
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-6, Method 16C, Section 7.1 |
ASTM D1193 |
1977 |
Standard Specification for Reagent Water
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 86.1(g)(6) |
SAE J-1930 |
1998 |
Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
|
Society of Automotive Engineers |