This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(3) | ASTM D 240 | 1987 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(34) | ASTM E 1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 13 | USGS Water-Resources Investigations Report 01-4098 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Moderate-Use Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and Gas Chromatography/Mass Spectrometry | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Atrazine) | SCP Method AG-625 | 2001 | Atrazine in Drinking Water by Immunoassay | Syngenta Crop Protection | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(x) | AGA Report No. 3, Part 2 | 2000 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(13)(i) | EPA-600-4-79-020 | 1983 | Method 279.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.13 | 2003 | Storage/Retrieval (S/R) Machines and Associated Equipment | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 56.14131(d) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Federal Railroad Administration | 49 CFR 229.51(a)(1) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B16.15 | 1985 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 306B, Section 6.2 | ASTM D 1331 | 1989 | Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1003(g) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(3) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (34) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 6.0(7) | EPA-454-R-99-022 | 1997 | Guidance for Network Design and Optimum Site Exposure for PM 2.5 and PM 10, Watson et al. | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.051-7(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Interior Department | 43 CFR 11.41(a) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 178.337-8(b)(2) | CI Drawing No. 106-6 | 1993 | Excess Flow Valve with Removable Baskets | Chlorine Institute, Inc. | |
Food and Drug Administration | 21 CFR 189.175(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Health and Human Services Department | 45 CFR 162.1102(b)(2)(iii) | ASC X12N 837 | 2006 | Health Care Claim: Professional | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12A | 2014 | Halon 1211 Systems | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9978 | 1992 | Sealed Radioactive Sources--Leakage Test Methods | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.1 | SAE J-2196 | 2008 | Service Hose for Automotive Air-Conditioning | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.043-1(a)(1) | FedSpec QQ-M-151 | 1936 | Metals; General Specification for Inspection of | Federal Specifications Standards and Test Methods | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(v) | API MPMS | 2013 | Chapter 12, Section 2, Part 3 | American Petroleum Institute | |
Rural Utilities Service | 33 CFR 154.106(h)(2) | OCIMF Publication | 1966 | International Safety Guide for Oil Tankers and Terminals (ISGOTT), Sections 9.1, 9.2, 9.3 and 9.5, 4th Edition | Oil Companies International Marine Forum | |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(ii) | 40 CFR 1065.710 | 2012 | Gasoline | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.160(a)(1) | LM Publication | 2009 | Parts List and Drawings, Part 572 Subpart S, Hybrid III 6-Year-Old Child Weighted Crash Test Dummy (H-III6CW) | Leet-Melbrook | |
Coast Guard | 33 CFR 96.370(a)(2) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.20 | 1998 | Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c) | Drawing No. 175-3500 | 2009 | Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(vii) | USGS Open File Report (OFR) 95-181 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by C-18 Solid-Phase Extraction and Capillary-Column Gas Chromatography/Mass Spectrometry With Selected-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.1801(a)(1) | OHUIC regulations | 1983 | Ohio Revised Code Annotated, sections 1509.01, 1509.03, 1509.221 | State of Ohio | |
Environmental Protection Agency | 40 CFR 63, Subpart SSSSS, Table 4, (1)(d)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 587.6(b) | Drawing No. DSL-1284 | 1980 | Side Impact Moving Deformable Barrier Drawings | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.201(h)(1)(ii) | AWPA P9 | 2001 | Standard for Solvents and Formulations for Organic Preservative Systems | American Wood Protection Association | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.4, b | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 147.7(e)(1) | DHHS 84-2024 | 1984 | The Ship's Medicine Chest and Medical Aid at Sea | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.156-5(b)(3) | ASTM A 313/A 313M | 2008 | Standard Specification for Stainless Steel Spring Wire | ASTM International | |
Coast Guard | 46 CFR 58.50-10(a)(3) Table 58.50-10(a) | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Coast Guard | 21 CFR 101.9(c)(1)(i)(E) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(vii) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 6.5 | ASTM D 1475 | 1960 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.21(d) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (58) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency |