This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.205 S6.3(a) | ANSI/SAE Z26.1 | 1996 | Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 612 | 1983 | Block and Board Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 3606 | 1992 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Research and Special Programs Administration | 46 CFR 111.105-3 | IEEE 45 | 1998 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1755.702(f)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Foaming agents) | APHA Method 5540 C | 1998 | Surfactants, Anionic Surfactants as MBAS | American Public Health Association | |
Food and Drug Administration | 21 CFR 177.1390(c)(3)(i)(A)(2) | FDA Publication | 2005 | Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(10) | ASME B30.14, Section 14-3.1.2 | 2004 | Side Boom Tractors, Operator Qualifications | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (28) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as Aroclors)) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(85) | ASTM D 6883 | 2004 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (27) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Coast Guard | 33 CFR 143.405(a)(15) | HHS 84-2024 | 1984 | The Ship's Medicine Chest and Medical Aid at Sea | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 60.41da Bituminous coal | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1512(a) | ASTM D7520-13 | 2013 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.125(a) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Education Department | 34 CFR 75.616(b)(2) | ASHRAE 90B | 1975 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 154.1802(c)(1) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Federal Motor Carrier Safety Administration | 49 CFR 393.93(a)(1) | FMVSS 210 | 1998 | Seat Belt Assembly Anchorages | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.25-20(b) | ASME B18.2.2 | 1987 | Square and Hex Nuts (Inch Series) | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(ii) | AATCC 16E | 1982 | Colorfastness to Light: Water Cooled Xenon-Arc Lamp, Continuous Light | American Association of Textile Chemists and Colorists | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME A112.21.3M | 1985 | Hydrants for Utility and Maintenance Use | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 98.7(e)(21) | ASTM D 3682 | 2006 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes | ASTM International | |
Environmental Protection Agency | 40 CFR 432.5(b)(1) | EPA-600-R–93-100 | 1993 | Methods for the Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 254.26(e)(2) | ASTM F 625 | 1994 | Standard Practice for Describing Environmental Conditions Relevant to Spill Control Systems for Use on Water | ASTM International | |
Coast Guard | 46 CFR 110.10-1(g)(13) | IEC 60079-15 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 15: Type of Protection “n”, Second Edition | International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(i) | ASTM D 156 | 1982 | Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(iv) | ASTM C 1045 | 1990 | Standard Test Method for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements | ASTM International | |
Coast Guard | 46 CFR 160.151-21(r) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Food and Drug Administration | 21 CFR 131.111(f)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 1051.245(e)(2) Table 2(ii) | SAE J-30 | 1998 | Fuel and Oil Hoses | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 21 CFR 165.110(a)(2)(iv) | The United States Pharmacopeia | 1995 | United States Pharmacopeia1995 HHS/FDA | U.S. Pharmacopeial Convention | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 95.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, A | ASTM E 1148 | 2002 | Standard Test Method for Measurements of Aqueous Solubility | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-1000 | 2009 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G 23 | 1969 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(E) | EPA Method 245.1 | 1994 | Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.401(a)(1)(ii) | DEHWMP | 1983 | Delaware Department of Natural Resources and Environmental Control Regulations Governing Hazardous Waste, Parts 260 through 265, 122 and 124, Order Number 83-SW-1 | State of Delaware | |
Environmental Protection Agency | 40 CFR 75.6(f)(2) | API Bulletin 2509 B | 1987 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit-Breaker Enclosures | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.115 | Drawing No. SA-SIDH3-M001 | 1994 | Completed Assembly Side Impact Dummy, 50th Percentile Male | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 63.3941(c) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1997 | Chapter 11.1, Volume 1, Table 5A, Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 ° | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Heavy Liquid | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International |