DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 430 Subpart B, App. M, 2.2, a | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.146(j) | Drawing No. 210-4540-1 | 1994 | No title given | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Organo-tin pesticides) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.751(b)(1)(i) | INHWMP | 2001 | EPA approved Authorized Indiana Statutory Requirements Applicable to the Hazardous Waste Management Program | State of Indiana | |
Environmental Protection Agency | 40 CFR 75.21(g)(9)(iii) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(a)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 272.2101(c)(1) | SDHWMP | 2014 | State of South Dakota Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of South Dakota | |
Rural Utilities Service | 7 CFR 1755.505(f)(13) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.052-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 177.2600(c)(4)(i) | ASTM D 1646 | 1992 | Standard Test Method for Rubber-Viscosity and Vulcanization Characteristics (Mooney Viscometer) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 926 | 1990 | Standard Specification for Application of Portland Cement-Based Plaster | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1)(ii) | Drawing No. 127-1015 | 2009 | Drawings and Specifications for the Hybrid III 6-year-old Dummy, Neck Assembly | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.522(k)(1) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 69 | 2014 | Explosion Suppression Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(k)(2) | MSS SP-9 | 2001 | Spot Facing for Bronze, Iron and Steel Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Food and Drug Administration | 21 CFR 189.145(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Railroad Administration | 49 CFR 238.230(c)(2) | APTA SS-C&S-020-03 | 2003 | Standard for Passenger Rail Vehicle Structural Repair | American Public Transit Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (20) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1203.3(a)(1) | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Minerals Management Service | 10 CFR 430 Subpart B, App. Q, 3.5.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(6)(ii) | APHA Method 4500-Cl D | 1995 | Chlorine, Amperometric direct | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | NSF 24 | 1988 | Plumbing System Components for Manufactured Homes and Recreational Vehicles | National Sanitation Foundation | |
Environmental Protection Agency | 40 CFR 63.14(d)(3)(iii) | EPA-454-R-98-015 | 1997 | Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.95(h)(2) | ANSI S3.6 | 1969 | Specifications for Audiometers | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.203(a) | ASTM E 162 | 1994 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(6) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix F | HSM-11001 | 2014 | Criteria for a Recommended Standard . . . Occupational Exposure to Noise | National Institute for Occupational Safety and Health | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (21) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Heptachlor Epoxide) | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(b)(iv) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Coast Guard | 46 CFR 113.40-10(b) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code) | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.214(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 420/A 420M | 1996 | Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(b)(1) | AASHTO Standard Specifications for Highway Bridges, 17th ed. | 2002 | Standard Specifications for Highway Bridges | American Association of State Highway and Transportation Officials | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(ii) | CIA PPRS-2 | 1992 | Polypropylene Fiber Rope, 3-Strand and 8-Strand Construction | Cordage Institute | |
Research and Special Programs Administration | 49 CFR 178.35(g) | CGA C-11 | 2001 | Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 178.2010(b) | ASTM D 1218 | 1982 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vi) | ISO 62:2008(E) | 2008 | Plastics—Determination of water absorption, Third Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 E | 1997 | Ammonia by Selective Ion Probe | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (4) Asbestos | EPA Method 100.1 | 1993 | Analytical Method For Determination of Asbestos Fibers in Water, EPA-600-4-83-043 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 55.14(e)(2)(ii)(A) | 40 CFR part 52, subpart C | 1992 | South Central Alaska Clean Air Authority Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.833(b)(5) | FAO Food and Nutrition Paper 5 | 1991 | Compendium of Food Additive Specifications, Addendum 4 | Food and Agricultural Organization of the United Nations | |
Consumer Product Safety Commission | 16 CFR 1630.62(a) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Energy Department | 10 CFR 431.15(b)(1)(ii) | NEMA MG-1 | 1993 | Motors and Generators, Section I, Part 4 | National Electrical Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 200.926e(d) | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Coast Guard | 46 CFR 160.077-29(c)(9) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 21 | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration by Using a Simultaneous Detection Technique (MI Medium) | U.S. Environmental Protection Agency |