DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(ix) | AGA Report No. 3, Part 1 | 1990 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines | American Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.6(a) | ASTM D 2515 | 1966 | Standard Specification for Kinematic Glass Viscosity | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (34) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 6.0(6) | EPA-450-4-87-009 | 1987 | Optimum Network Design and Site Exposure Criteria for Particulate Matter, Koch, R.C. and H.E. Rector; EPA Contract No. 68-02-3584 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.400-8(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Energy Department | 10 CFR 430.2, Definitions, Rated wattage (1)(i) | ANSI C78.81 | 2005 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (4) | ASTM 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | NFPA 31 | 1987 | Standard for the Installation of Oil-Burning Equipment | National Fire Protection Association | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.70-5(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.052-1(a)(2) | MIL-W-530F | 1988 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.97(b)(10) | RUS Bulletin 345-180, Form 397a | 1963 | Specification for Voice Frequency Repeaters and Voice Frequency Repeater Trunks | Rural Utilities Service, U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.228(b) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Food and Drug Administration | 16 CFR 1616.2 Footnote 2 | ANSI Z535.1 | 1998 | Standard for Safety Color Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(34) | NFPA 1971 | 1975 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 801.430(f)(2) | ASTM D 3492 | 1997 | Standard Specification for Rubber Contraceptives (Male Condoms) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Types 1C1and 2C1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 3286 | 1985 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter | ASTM International | |
Drug Enforcement Administration | 21 CFR 1300.03 NIST SP 800-76-1 | NIST Special Publication 800-76-1 | 2007 | Biometric Data Specification for Personal Identity Verification; Wilson, C. et al. | National Institute of Standards and Technology, U.S. Department of Commerce | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Coast Guard | 46 CFR 160.174-3(b) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 10 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.1 | SAE J-1991 | 1991 | Standard of Purity for Use in Mobile Air-Conditioning Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(2) | SAE Publication | 1970 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 11 | USGS Open File Report (OFR) 95-181 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by C-18 Solid-Phase Extraction and Capillary-Column Gas Chromatography/Mass Spectrometry With Selected-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.1800(a)(2) | OHUIC regulations | 1983 | Rules of the Division of Oil and Gas, Ohio Administrative Code sections 1501:91-01, through 1501: 9-11-13 | State of Ohio | |
Environmental Protection Agency | 40 CFR 63, Subpart PPPPP, Table 7 | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.397(l)(4)(vi) | ANSI S1.4 | 1983 | Specifications for Sound Level Meters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(28)(i) | Orion Research Instruction Manual | 1977 | Residual Chlorine Electrode Model 97-70 | ORION Research Incorporated | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-2C | 1976 | Airport Design Standards--Site Requirements for Terminal Navigational Facilities | Federal Aviation Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a)(2) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Coast Guard | 27 CFR 21.78(a)(3) | National Formulary | 1980 | Formula No. 42 | U.S. Pharmacopeial Convention | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(4)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(C)(2) | EPA-450-3-84-019 | 1986 | Procedures for Certifying Quantity of Volatile Organic Compounds Emitted by Paint, Ink and Other Coatings | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(g)(17) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 178.2650(b)(1)(iii) | FDA Publication | 1977 | Atomic Absorption Spectrometric Determination of Sub-Part-Per-Million Quantities of Tin in Extracts and Biological Materials with Graphite Furnace, Analytical Chemistry, Vol 49, p. 1090-1093 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.077-19(d)(3) | ASTM D 751 | 1995 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 170.245(b)(9) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Coast Guard | 46 CFR 111.60-1(d) | IEEE Std 1580 | 2001 | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 160.133-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-3500 | 2009 | Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (58) | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A 352/A 352M | 1998 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure Containing Parts, Suitable for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (perfluorobutanesulfonic acid (PFBS)) | EPA Method 537 | 2009 | Determination of Selected Perfluorinated Alkyl Acids in Drinking Water by Solid Phase Extraction and Liquid Chromatography/Tandem Mass Spedctrometry (LC/MS/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E 169 | 1993 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 605 | 1982 | Benzidines by HPLC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(b)(2) | AGA Report No. 3, Part 2 | 2000 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association |