DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
National Archives and Records Administration | 36 CFR 1234.3(g)(3) | UL 1076 | 1999 | Proprietary Burglar Alarm Units and Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 7 CFR 1755.506(d) | IEEE C2 | 1997 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.23 | 1989 | Gas Appliance Thermostats with Addenda Z21.23a-91 | American National Standards Institute | |
Minerals Management Service | 30 CFR 817.49(c)(2)(i) | USDA Technical Release 210-VI-TR60 | 1985 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 111.30-5(a)(1) | IEC 60092-302 | 1997 | Electrical Installation in Ships, Part 302: Low-Voltage Switchgear and Control Gear Assemblies, Fourth Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (3) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1520(d)(8) | ASTM D 3418 | 1982 | Standard Test Method for Transition Temperatures of Polymers by Thermal Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(2)(v) | SAE J-1978 | 2002 | OBD II Scan Tool Equivalent to ISO/DIS 15031-4 | Society of Automotive Engineers | |
Coast Guard | 33 CFR 126.15(a)(4) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 8115 | 1986 | Cotton Bale--Dimensions and Density | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(vi) | ASTM D 3676 | 1983 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Rural Utilities Service | 7 CFR 1755.505(f)(12) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1918.3(c)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Public Health Service | 42 CFR 52b.12(b) | SBCCI Standard Building Code | 1997 | Standard Building Code | Southern Building Code Congress International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(6) | SAE J-227a | 1976 | Electric Vehicle Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (36) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4500-SO4(2-) C | 1992 | Sulfate, Gravimetric Method with Ignition of Residue | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(v) | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1)(ii) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section III, 1989 Addenda through the latest edition, and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(ff)(1) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power-Transmission Apparatus | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (38) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 8 | DOE HASL-300 | 1997 | DOE EML Procedures Manual, 28th Edition, Volume 1 | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(33) | EPA-450-4-87-013 | 1987 | On-Site Meteorological Program Guidance for Regulatory Modeling Applications | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(2)(ii) | EPA-600-R-98-118 | 1997 | Method 300.1--Determination of Inorganic Anions in Drinking Water by Ion Chromatography | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1994 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Energy Department | 10 CFR 431.15(e)(2)(ii) | ISO/IEC Guide 25 | 2017 | General requirements for the competence of calibration and testing laboratories | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1020 | 1996 | Standard Specification for Line-Blind Valves for Marine Applications | ASTM International | |
Federal Communications Commission | 47 CFR 15.38(b)(10) | EIA-708-B | 1999 | Digital Television (DTV) Closed Captioning | Electronic Industries Association | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-19(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-24 | 1975 | Runway and Taxiway Edge Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.9(a) | Drawing No. SA 150 M060 | 1994 | Pelvis and Abdomen Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 111.60-3(a)(3) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 172.015(a)(2) | IMO Resolution A.264(VIII) | 1960 | Amendment to Chapter VI of the International Convention for the Safety of Life at Sea | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.6(a)(41) | ASTM D 5373 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 182.500(b) | ISO 8846 | 1990 | Small Craft-Electrical Devices-Protection Against Ignition of 1990 DHS/USCG | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN G | 1995 | Cyanide Amenable to Chlorination after Distillation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.41(y) | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(5) | ASTM D 613 | 2013 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.2.3.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-3 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.188(b)(1) | Drawing No. 175-3010 | 2009 | Shoulder foam pad | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 16 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 2, (5)(a) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(v) | ASTM D 1335 | 1972 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International |