Occupational Safety and Health Administration |
|
29 CFR 1910.95(h)(5)(iii) |
ANSI S3.6 |
1969 |
Specifications for Audiometers
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 98.7(m)(3) |
EPA-430-R-10-003 |
2010 |
Protocol for Measuring Destruction or Removal Efficiency (DRE) of Fluorinated Greenhouse Gas Abatement Equipment in Electronics Manufacturing, Version 1
|
U.S. Environmental Protection Agency |
Patent and Trademark Office |
|
37 CFR 1.821(a)(2) |
WIPO Standard ST.25 |
1998 |
WIPO Handbook on Industrial Property Information and Documentation
|
World Intellectual Property Organization |
Coast Guard |
|
46 CFR 30.10-22(c)(Note 1) |
ASTM D323 |
1994 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footnote 9 |
ASTM Annual Book of Standards |
2000 |
Water and Environmental Technology, Section 11.02
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 104, 7.1 |
ASTM D1193 |
1977 |
Standard Specification for Reagent Water
|
ASTM International |
Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.48(a) |
The United States Pharmacopoeia |
1980 |
Formula No. 23-F
|
U.S. Pharmacopeial Convention |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
ASTM F496 |
2008 |
Standard Specification for In-Service Care of Insulating Gloves and Sleeves
|
ASTM International |
Coast Guard |
|
46 CFR 160.135-11(c)(2)(i)(B) |
ASTM D638 |
2008 |
Standard Test Method for Tensile Properties of Plastics
|
ASTM International |
Minerals Management Service |
|
30 CFR 250.1202(a)(2)(viii) |
API MPMS |
2013 |
Chapter 21, Addendum to Section 2
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASTM F682 |
1993 |
Wrought Carbon Steel Sleeve-Type Pipe Couplings
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (63) |
EPA Method 525.1 |
1988 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 147.650(a)(9) |
IDUIC regulations |
1980 |
Administrative Procedure, Title 67, Chapter 52, Idaho Code, sections 67-5201 through 67-5218 (Bobbs-Merrill 1980 and Supp. 1984)
|
State of Idaho |
Environmental Protection Agency |
|
40 CFR 63.10692 Free organic liquids |
EPA Method 9095B |
1994 |
Paint Filter Liquids Test, Revision 2
|
U.S. Environmental Protection Agency |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(F)(5) |
EPA Method 524.2 |
1989 |
Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Research and Special Programs Administration |
|
49 CFR 178.356-2(e) |
AWS B3.0 |
1972 |
Standard Qualification Procedure
|
American Welding Society |
Environmental Protection Agency |
|
40 CFR 60.17(g)(11) |
ASTM A483 |
1988 |
Standard Specification for Silicomanganese
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (73) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.40(c)(3) |
APHA Standard Methods, 21th Edition |
2005 |
Standard Methods for the Examination of Water and Wastewater. 21th Edition
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(3) |
APHA Method 601 |
2015 |
Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere
|
American Public Health Association |
Energy Department |
|
10 CFR 430.2, Definitions, General service incandescent lamp (21) |
ANSI C78.20 |
2003 |
Electric Lamps--A, G, PS, and Similar Shapes with E26 Medium Screw Bases
|
American National Standards Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(12) |
API MPMS |
2005 |
Chapter 4, Section 4
|
American Petroleum Institute |
Coast Guard |
|
46 CFR 160.055-1(a)(5) |
46 CFR 164.015 |
2012 |
Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes
|
U.S. Coast Guard |
Rural Utilities Service |
|
7 CFR 1755.910(d)(3)(xv) |
ASTM A525 |
1991 |
Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process
|
ASTM International |
Health and Human Services Department |
|
45 CFR 162.1602(d)(2) |
ASC X12N 835 |
2006 |
Health Care Claim Payment/Advice
|
Washington Publishing Company |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.862(e) |
API RP 14FZ |
2013 |
Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations
|
American Petroleum Institute |
Food and Drug Administration |
|
21 CFR 179.45(b)(9) |
ASTM D729 |
1981 |
Standard Specification for Vinylidene Chloride Molding Compounds
|
ASTM International |
Coast Guard |
|
46 CFR 114.600(b) |
ANSI Z26.1 |
1977 |
Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways, including 1980 supplement
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(14) |
Drawing No. 78051-383X |
1995 |
Neck Transducer Structural Replacement
|
General Motors Corporation |
Rural Utilities Service |
|
7 CFR 1755.390(i)(5)(iii) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
National Highway Traffic Safety Administration |
|
40 CFR 136.3(a) Table IB (16) |
APHA Method 4500-Cl C |
1997 |
Chlorine by Iodometric Method II
|
American Public Health Association |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 7866 |
1999 |
Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing
|
International Organization for Standardization |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(86) |
API MPMS |
1998 |
Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition
|
American Petroleum Institute |
Housing and Urban Development Department |
|
24 CFR 200.929(a) |
HUD MPS |
2013 |
Minimum Property Standards
|
U.S. Department of Housing and Urban Development |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 48 |
USGS Open File Report (OFR) 92-146 |
1992 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Total Phosphorus by Kjeldahl Digestion Method and an Automated Colorimetric Finish That Includes Dialysis
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (19) Nitrite |
APHA Method 4110 B |
2000 |
Anions by Ion Chromatography with Chemical Suppression of Eluent
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.17(g)(179) |
ASTM D6228 |
1998 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
|
ASTM International |
Environmental Protection Agency |
|
86 FR 34308 |
ASTM D5769 |
2010 |
Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(b)(7)(vi) |
EPA-600-4-88-039 |
1991 |
Methods for the Determination of Organic Compounds in Drinking Water
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 763 Appendix A (II)(J)(2) |
EPA-600-4-85-049 |
1985 |
Measuring Airborne Asbestos Following an Abatement Action
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 98.414(n)(1) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(xiv) |
EPA Method 0060 |
1996 |
Determination of Metals in Stack Emissions (and in Basic Manual Update III)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 52, Subpart W |
MASIP |
1979 |
Commonwealth Implementation Plan with Regulatory and Nonregulatory Revisions
|
Commonwealth of Massachusetts |
Coast Guard |
|
46 CFR 110.10-1(o)(14) |
UL 1203 |
2004 |
Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 63.1282(g)(4)(iii)(B)(3) |
ASTM D3588 |
2003 |
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels
|
ASTM International |
Food and Drug Administration |
|
21 CFR 172.869(b)(8) |
Food Chemicals Codex |
1997 |
Sucrose Fatty Acid Esters
|
National Academy Press |
Mine Safety and Health Administration |
|
30 CFR 77.403-1(e)(4) |
29 CFR 1926.1001 |
2013 |
Minimum Performance Criteria for Rollover Protective Structures for Designated Scrapers, Loaders, Dozers, Graders, and Crawler Tractors
|
Occupational Safety and Health Administration, U.S. Department of Labor |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B16.4 |
1998 |
Gray Iron Threaded Fittings, Classes 125 and 250
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 179.220-7(a) |
ASTM A516/A 516M |
1990 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 600.315-08(c) |
SAE RP 1100a |
1973 |
Motor Vehicle Dimensions—Recommended Practice (Report of Human Factors Engineering Committee
|
Society of Automotive Engineers |