This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. 104-8 | 1993 | Standard Chlorine Angle Valve Assembly | Chlorine Institute, Inc. | |
Rural Utilities Service | 7 CFR 1755.703(c)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Health and Human Services Department | 45 CFR 162.1603(a)(1) | CAQH Publication | 2012 | Phase III CORE 380 EFT Enrollment Data Rule, version 3.0.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Occupational Safety and Health Administration | 29 CFR 1910.134(i)(1)(ii) | CGA G-7.1 | 1989 | Commodity Specification for Air | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(3)(iv) | 42 CFR 84 | 2014 | Approval of Respiratory Devices | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 164.015-4(e) | Federal Standard 601 | 1955 | Rubber, Sampling and Testing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | APHA Method 9221 A | 1999 | Multiple-Tube Fermentation Technique for Members of the Coliform Group | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 307B | 1995 | Gas Burning Appliances for Mobile Homes and Recreational Vehicles, Fourth Edition, with 1998 Revisions | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C2 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Coast Guard | 46 CFR 12.05-7(a)(5) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Mine Safety and Health Administration | 30 CFR 57.3203(a)(1) | ASTM F 432 | 1995 | Standard Specification for Roof and Rock Bolts and Accessories | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1500(a)(1) | NHUIC regulations | 1978 | New Hampshire Revised Statutes Annotated section 149:8 III(a) | State of New Hampshire | |
Coast Guard | 33 CFR 183.5(b) | ASTM D 1622 | 1993 | Standard Test Method for Apparent Density of Rigid Cellular Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(119) | ASTM D 3176 | 1974 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.060-5(e) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 116.423(b) | UL 1056 | 1989 | Fire Test of Upholstered Furniture | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbuthylazine) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(9) Footnote 1 | ASTM Annual Book of Standards | 1991 | ASTM Annual Book of Standards | ASTM International | |
Environmental Protection Agency | 40 CFR 80.8(e)(1)(iv) | ASTM D 5854 | 2010 | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1) | SAE J-397a | 1973 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(ii) | Drawing No. 880105-250 | 2000 | Neck Assembly | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 172.859(b)(5) | FDA Test Method U.1 | 1981 | Determination of Ethyl Acetate | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 111.01-9(d) | IEC 60529 | 1989 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 12, 14(c) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Energy Department | 10 CFR 434.404.1.1(a) | ANSI Z21.10.3 | 1993 | Gas Water Heaters (RS-39) | American National Standards Institute | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 193.2517 | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 3606 | 1992 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix A, Table 4 | ASTM D 1319 | 1998 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption 1998 EPA/AP | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(3) | UL 142 | 1968 | Steel Aboveground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Public Health Service | 42 CFR 37.45 | NCRP Report No. 105 | 1989 | Radiation Protection for Medical and Allied Health Personnel | National Council on Radiation Protection and Measurement | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(34) | ASTM E 1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 13 | USGS Water-Resources Investigations Report 01-4098 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Moderate-Use Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and Gas Chromatography/Mass Spectrometry | U.S. Geological Survey | |
Research and Special Programs Administration | 49 CFR 172.704(a)(2)(ii) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 21 CFR 172.804(b) | Food Chemicals Codex | 1981 | Aspartame | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 571.205 S5.1 | SAE J-673 | 1993 | Automotive Safety Glasses | Society of Automotive Engineers | |
Energy Department | 10 CFR 430.3(k)(6) | IES LM-58 | 1994 | Guide to Spectroradiometric Measurements | Illuminating Engineering Society of North America | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(3) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (34) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Atrazine) | SCP Method AG-625 | 2001 | Atrazine in Drinking Water by Immunoassay | Syngenta Crop Protection | |
Environmental Protection Agency | 40 CFR 60.107a(d)(5)(x) | AGA Report No. 3, Part 2 | 2000 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Federal Aviation Administration | 14 CFR 97.20(b) | FAA Form 8260-5 | 2006 | Standard instrument approach procedures and associated supporting data | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 6.0(7) | EPA-454-R-99-022 | 1997 | Guidance for Network Design and Optimum Site Exposure for PM 2.5 and PM 10, Watson et al. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(158) | ASTM D 4442 | 1992 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-1D | 1973 | Marking of Paved Areas on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.870(g)(3)(i) | ASTM D 2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.211(c)(1)(iv) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association |