This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toluene) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.46(c)(2) | ASTM D 1826 | 2003 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Federal Communications Commission | 47 CFR 2.950(b) | ISO/IEC 17065 | 2012 | Conformity assessment—Requirements for bodies certifying products, processes and services | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 177.2000(d)(2) | ASTM D 3536 | 1976 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by Liquid Exclusion Chromatography (Gel Permeation Chromatography--GPC) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F 1236 | 1996 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(3) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(1) | ASTM A 47 | 1968 | Malleable Iron Castings | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 514 | 1981 | High-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.201a(b)(1) | ICC/ANSI A117.1 | 2003 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(i) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1006 | 1992 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Coast Guard | 21 CFR 172.736(b)(2) | Food Chemicals Codex | 2004 | Acid Value | National Academy Press | |
Environmental Protection Agency | 40 CFR 60.17(g)(12) | ASTM A 495 | 1976 | Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon | ASTM International | |
Coast Guard | 46 CFR 10.231(c)(3)(iv) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 162.161-2(d)(1) | UL 2127 | 2001 | Standard for Safety for Inert Gas Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(e) Table II Footnote 17 | EPA Method 1631 | 2004 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-02-019. Revision E | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1148 | 2002 | Standard Test Method for Measurements of Aqueous Solubility | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(1) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Prometon) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.78(d)(1)(i)(B) | NVUSTP | 1992 | Nevada Regulatory Requirements Applicable to the Underground Storage Tank Program | State of Nevada | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 3 | 1992 | Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications | American Gas Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 56.6201(b)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
National Highway Traffic Safety Administration | 49 CFR 572.7(a) | Drawing No. SA 150M 020 | 1987 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.171-3(b) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 172.859(b)(1) | FDA Publication | 1996 | Sucrose Fatty Acid Esters, Methods of Assay | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 155.140(d)(1) | IMO Resolution A.535(13) | 1983 | Recommendations on Emergency Towing Requirements for Tankers | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 46 CFR 31.40-5(a) | IMO SOLAS | 1995 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(iii) | SAE J-395 | 1974 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-352 | 1997 | Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 195.132(b)(2) | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.870(b)(12)(v) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Food Safety and Inspection Service | 9 CFR 381.10(e)(2) | DHEW Publication 78-2081 | 1976 | Food Service Sanitation Manual, Recommendations | U.S. Department of Health and Human Services | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(4) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(33) | NFPA 656 | 1959 | Code for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 801.430(f)(2) | ASTM D 3492 | 1997 | Standard Specification for Rubber Contraceptives (Male Condoms) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Types 1C1and 2C1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Coast Guard | 33 CFR 157.02(b)(1) | IMCO Resolution A.393(X) | 1997 | Recommendation on International Performance and Test Specifications For Oily Water Separating Equipment and Oil Content Meters | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Pentachlorophenol) | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(v) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers |