This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2013(a)(1) | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Environmental Protection Agency | 40 CFR 260.11(d)(1) | NFPA 30 | 1981 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toluene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D 1826 | 1977 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Federal Communications Commission | 47 CFR 2.950(c) | ISO/IEC Guide 61 | 1996 | General requirements for assessment and accreditation of certification/registration bodies | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6.2 | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
Education Department | 34 CFR 75.616(b)(1) | ASHRAE 90A | 1980 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 3280.703 | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 160.151-27(a) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 33 CFR 127.611 | ASTM F 1121 | 1993 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 60.614(e)(4) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.200-7(e) Table | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Minerals Management Service | 30 CFR 250.1922(a)(1) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Mine Safety and Health Administration | 30 CFR 57.5040(b)(4) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 130.5, Liquid | ASTM D 4359 | 1990 | Standard Test Method for Determining Whether a Material is a Liquid or a Solid | ASTM International | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(7) | ANSI/GEIA-STD-0010 | 2008 | Standard Best Practices for System Safety Program Development and Execution | Government Electronics & Information Technology Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (15) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 79.56(d)(5)(i) | ASTM D 4814 | 1993 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(20) | EPA Method 1613 | 1990 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Specific Extinction Area | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | ASCE 7 | 1993 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1163 | 1998 | Standard Test Method for Estimating Acute Oral Toxicity in Rats | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068D | 2003 | Standard Test Methods for Iron in Water, Photometric Bathophenanthroline mg/L | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 434.701.1 RS-3 | NEMA MG-1 | 1993 | Motors and Generators (RS-3) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 430.3(c)(15) | ANSI C82.11 | 2002 | American National Standard for Lamp Ballasts—High-frequency Fluorescent Lamp Ballasts—Supplements | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 282.79(d)(1)(i)(B) | NHUSTP | 1993 | New Hampshire Regulatory Requirements Applicable to the Underground Storage Tank Program | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 116.300(a)(2) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Federal Communications Commission | 47 CFR 76.602(b)(4) | SCTE 54 (formerly DVS 241) | 2003 | Digital Video Service Multiplex and Transport System Standard for Cable Television | Society of Cable Telecommunications Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM E 871 | 2006 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 178.2010(b) | ASTM D 1962 | 1979 | Standard Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids | ASTM International | |
Coast Guard | 46 CFR 164.120-5(d)(4) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | USGS I-4327-85 | 1989 | Fluoride, electrometric, ion-selective electrode, automated segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | HCC Method 10029 | 1999 | Coliforms-Total and E. coli, Membrane Filtration Method, m-ColiBlue24® | Hach Chemical Company | |
Rural Utilities Service | 7 CFR 1755.870(n)(2) | ASTM E 29 | 1990 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(d)(3) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Coast Guard | 46 CFR 128.240(b)(2) | ANSI B31.1 | 1989 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
Coast Guard | 46 CFR 160.077-19(d)(3) | Federal Standard 191 | 1978 | Method 5134, Strength of Cloth, Tearing: Tongue Method | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFr 572.175(a) | Drawing No. 420-4300 | 2011 | Abdominal insert | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Trifluralin) | EPA Method 627 | 1997 | The Determination of Dinitroaniline Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(k)(10) | MSS SP-61 | 2003 | Pressure Testing of Steel Valves | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 58.03-1(g)(5) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Food and Drug Administration | 21 CFR 177.1380(a)(4) | ASTM D 3275 | 1989 | Standard Specification for E-CTFE-Flouroplastic Molding Extrusion and Coating Materials | ASTM International | |
Food and Drug Administration | 21 CFR 184.1259(b)(3) | Food Chemicals Codex | 1996 | Heavy Metals Test | National Academy Press | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Pentachlorophenol) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(viii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers |