| Environmental Protection Agency |
|
40 CFR 1065.710 Table 1 |
ASTM D3231 |
2013 |
Standard Test Method for Phosphorus in Gasoline
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.10(a) |
Drawing No. SA 150 M080 |
1987 |
Right Leg Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Coast Guard |
|
33 CFR 157.02(b)(5) |
IMO Marine Environment Protection Committee Resolu |
2003 |
Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers
|
International Maritime Organization |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(20) |
ANSI J6.5 |
1971 |
Rubber Insulating Sleeves
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (59) |
APHA Method 3125 B |
2009 |
Inductively Coupled Plasma/Mass Spectrometric Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (20) Ortho-phosphate |
APHA Method 4110 B |
2000 |
Anions by Ion Chromatography with Chemical Suppression of Eluent
|
American Public Health Association |
| Coast Guard |
|
46 CFR 154.610(c) |
ASTM A20/A 20M |
1997 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
ASTM F1958/F 1958M |
2012 |
Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
|
ASTM International |
| Coast Guard |
|
46 CFR 111.99-5 |
IMO SOLAS |
2001 |
International Convention for the Safety of Life at Sea
|
International Maritime Organization |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.104(e)(1) |
ASTM D3953 |
1998 |
Standard Specification for Strapping, Flat Steel and Seals
|
ASTM International |
| Coast Guard |
|
46 CFR 54.10-10(b) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(144) |
ASTM D4057 |
1981 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.209 S5.2(j)(2)(iii) |
SAE J-211/1 |
2003 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.310(b)(4) |
SAE J-2263 |
2008 |
Road Load Measurement Using Onboard Anemometry and Coastdown Techniques
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(xxi) |
APHA Method 3125 |
2009 |
Metals by Inductively Coupled Plasma-Mass Spectrometry
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 799.5085(h)(1)(iii) |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.464(b)(4)(i)(E) |
APHA Method 2540 G |
2015 |
Total, Fixed, and Volatile Solids in Solid and Semisolid Samples NDG
|
American Public Health Association |
| Coast Guard |
|
40 CFR 136.3(a) Table IF (o-Dichlorobenzene) |
EPA Method 1626 C |
1991 |
Semivolatile Organic Compounds by Isotope Dilution GC/MS
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 173.395(d) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(iii) |
ASTM C739 |
2003 |
Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(4)(i) |
ISO 175:1999(E) |
1999 |
Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(ii) |
ASTM D3370 |
2008 |
Standard Practices for Sampling Water
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 178.3870(f)(1) |
ASTM D509 |
1981 |
Standard Test Methods of Sampling and Grading Rosin
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 176.84(b)128 |
IMDG Code |
2006 |
International Maritime Dangerous Goods Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Alachlor) |
EPA Method 1656 |
1993 |
The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 262.83(d)(12) |
OECD Publication |
2009 |
Annex C (Amber List) of the 2009 Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations
|
Organization for Economic Cooperation and Development |
| Consumer Product Safety Commission |
|
16 CFR 1211.2(c) |
NFPA 70 |
1999 |
National Electrical Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (2) |
EPA Method 610 (GC) |
1982 |
Polynuclear Hydrocarbons by GC/FID
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.1700(a)(1) |
NCUIC regulations |
1987 |
Administrative Procedure Act, N.C. GEN. STAT. 150B-1 through 150B-64 (1987 and Cumm. Supp. 1989)
|
State of North Carolina |
| Rural Utilities Service |
|
7 CFR 1755.901(d)(1) |
ASTM A640 |
1997 |
Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(7) |
ASTM A101 |
1993 |
Standard Specification for Ferrochromium
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.261(g)(18)(v) |
ANSI Z9.1 |
1951 |
Safety Code for Ventilation and Operation of Open Surface Tanks
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.132-3 |
IMO LSA Code |
2010 |
International Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.25(a) |
Drawing No. SA 1001 |
1974 |
6-Month-Old Infant
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (116) |
ASTM D7065 |
2006 |
Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 3 |
Colilert® Method |
2013 |
Colilert Test Kit
|
IDEXX Laboratories |
| Environmental Protection Agency |
|
40 CFR 63.654(c)(3) |
TCEQ Sampling Procedures Manual |
2003 |
Appendix P: Cooling Tower Monitoring, Air Stripping Method (Modified El Paso Method) for Determination of Volatile Organic Compound Emissions from Water Sources, Revision Number One
|
Texas Commission on Environmental Quality |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(71) |
ANSI Z87.1 |
1989 |
Practice of Occupational and Educational Eye and Face Protection
|
American National Standards Institute |
| Rural Utilities Service |
|
7 CFR 1755.902(r)(13) |
ICEA S-87-640 |
2006 |
Standard for Optical Fiber Outside Plant Communications Cable, 4th edition
|
Insulated Cable Engineers Association |
| Coast Guard |
|
46 CFR 95.01-2(c)(1) |
NFPA 13 |
1996 |
Standard for the Installation of Sprinkler Systems
|
National Fire Protection Association |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-5 |
1963 |
Specification for L-847 Circuit Selector Switch, 5,000 Volt 20 Ampere
|
Federal Aviation Administration, U.S. Department of Transportation |
| Veterans Affairs Department |
|
38 CFR 17.74(g)(1) |
NFPA 101 |
2009 |
Life Safety Code
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926 Subpart L Appendix A (1)(b)(i) |
ANSI A10.8 |
1988 |
Scaffolding-Safety Requirements
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.46(c)(2) |
ASTM D2015 |
1978 |
Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1211.10 (d) |
UL 746C |
2004 |
Standard for Safety: Polymeric Materials—Use in Electrical Equipment Evaluations
|
Underwriters Laboratories, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1926.302(e)(12) |
ANSI A10.3 |
1970 |
Safety Requirements for Explosive-Actuated Fastening Tools
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.130(a)(1)(v) |
Drawing No. 880105-560-1 |
2000 |
Complete Leg Assembly, Left
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (73) |
APHA Method 2130 B |
2001 |
Turbidity, Nephelometric Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Chlorobenzene) |
EPA Method 524.2 |
1995 |
Volatile Organic Compounds GC/MS Capillary Column
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table Note 3 |
ASTM Annual Book of Standards |
1999 |
Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02
|
ASTM International |