This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75.6(c)(1) | ISO 8316:1987(E) | 1987 | Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB (33) | USGS I-3447-85 | 1985 | Magnesium, by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (10) | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 63.606(c)(3)(ii)(F) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Centers for Medicare & Medicaid Services | 42 CFR 483.470(j)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 178.255-2(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.133(b)(2) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-2(b)(1)(i) | ASTM A 300 | 1958 | Standard Specification for Steel Plates for Pressure Vessels for Service at Low-Temperature | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-28C | 1977 | Specification for L-851 Visual Approach Slope Indicators and Accessories | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(1) | NHTSA Publication | 2009 | Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(D) | EPA Method 218.6 | 1994 | Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.585(f)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(n)(1) | NCASI Method DI/MEOH-94.03 | 2000 | Methanol in Process Liquids and Wastewaters by GC/FID | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 70E | 2000 | Electrical Safety Requirements for Employee Workplaces | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 59.412(b)(2) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (82) | EPA Method 607 | 1982 | Nitrosamines by GC/NPD | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.3M | 1987 | Stainless Steel Plumbing Fixtures (Designed for Residential Use) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 35.25-10(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 160.052-1(a)(4) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.890(p)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 147.350(a)(2) | CTUIC regulations | 1990 | Connecticut General Statutes Annotated, Title 22a (Environmental Protection), Chapter 446K | State of Connecticut | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3840 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications | ASTM International | |
Food and Drug Administration | 21 CFR 136.160(a)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Energy Department | 10 CFR 430 Subpart B, App. F, 3.1 | ANSI/ASHRAE 16 | 2009 | Method of Testing for Rating Room Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-13(d)(4)(vii) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Archives and Records Administration | 36 CFR 1234.12(e) | NFPA 13 | 2002 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.150(a)(1)(i) | Drawing No. 921022-001 | 2001 | Head Assembly | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(6) | AWPA A7 | 2004 | Standard for Wet Ashing Procedures for Preparing Wood for Chemical Analysis | American Wood Protection Association | |
Minerals Management Service | 30 CFR 250.806(a)(3) | API Spec. 14A | 2006 | Specifications for Subsurface Safety Valve Equipment | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (16) | ASTM C 150 | 1977 | Standard Specification for Portland Cement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 94.5(a)(1) | ASTM D 86 | 2001 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 600.302-12(b)(6) | ISO/IEC 18004:2006(E) | 2006 | Information technology—Automatic identification and data capture techniques—QR Code 2005 bar code symbology specification, Second Edition | International Organization for Standardization / International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.405(c)(2)(ii)(J) | ANSI/NFPA 70 | 2014 | National Electrical Code, Article 400, Table 400-4 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | DOE HASL-300 | 1990 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(1)(iv) | CAQH Publication | 2011 | Phase I CORE 155: Eligibility and Benefits Batch Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 75.6(f)(4) | API MPMS | 2005 | Chapter 22, Section 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(12) | ASME B56.1 | 1959 | Safety Standard for Powered Industrial Trucks | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1564 | 2013 | Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.11(j) | Drawing No. SA 150 M002 | 1996 | Hybrid II 50th Male Dummy (?) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | ASTM D 511A | 2003 | Calcium by EDTA Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7520 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency |