Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (11) |
APHA Method 4140 B |
1997 |
Bromide, CIE/UV
|
American Public Health Association |
Coast Guard |
|
33 CFR 157.02(b)(3) |
IMO Resolution A.586(14) |
1985 |
Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (7) Cadmium |
APHA Method 3113 B |
1999 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 58 Appendix D, 6.0(2) |
EPA-450-3-75-077 |
1975 |
Selecting Sites for Carbon Monoxide Monitoring. Stanford Research Institute, Ludwig, F.F., J.H.S. Kealoha, and E. Shelar
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM B209 |
1996 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 195.264(e)(4) |
API 2510 |
2001 |
Design and Construction of LPG Installations
|
American Petroleum Institute |
Mine Safety and Health Administration |
|
30 CFR 57 Subpart C Appendix I |
NFPA 12A |
2009 |
Halon 1301 Fire Extinguishing Systems
|
National Fire Protection Association |
Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(1)(i) |
ASTM C1166 |
2000 |
Standard Test Method for Flame Propagation of Defense and Cellular Elastomeric Gaskets and Accessories
|
ASTM International |
Coast Guard |
|
33 CFR 127.003(b) |
ASME B31.3 |
1993 |
Chemical Plant and Petroleum Refinery Piping
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(b)(3)(ii)(E) |
EPA Method 245.1 |
1994 |
Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 435.13 Note 11(b) |
EPA Method 1647 |
2015 |
Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Section 1 |
SAE J-1990 |
1990 |
Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.5 |
ASTM D1552 |
2001 |
Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AHA A135.4 |
1982 |
Basic Hardboard
|
American Hardboard Association |
Coast Guard |
|
46 CFR 67.13(b) |
DOC Publication 55DC |
1987 |
Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas
|
U.S. Department of Commerce |
Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-4 |
1976 |
Airport Design Standards--Airports Served by Air Carriers--Runway Geometrics (Through change 1, 1976)
|
Federal Aviation Administration, U.S. Department of Transportation |
Coast Guard |
|
46 CFR 56.01-2(d)(5) |
ASME B16.3 |
1998 |
Malleable Iron Threaded Fittings, Classes 150 and 300
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.103(b) |
ANSI B31.1 Addendum |
1969 |
Code for Pressure Piping Addendum
|
American National Standards Institute |
Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.807(19) |
1995 |
Performance Standards for INMARSAT Standard-C Ship Earth Stations Capable of Transmitting and Receiving Direct-Printing Communications
|
International Maritime Organization |
Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(2)(iii)(B) |
SAE J-429e |
1969 |
Mechanical and Quality Requirements for Externally Threaded Fasteners
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 148.220(b)(1) |
UN Manual of Tests and Criteria |
2009 |
Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition
|
United Nations |
National Highway Traffic Safety Administration |
|
49 CFR 572.146(c) |
Drawing No. SA-572-S19 |
1987 |
Load-moment Transducer
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Fensulfothion) |
EPA Method 1657 |
1993 |
The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 6.3 |
ASTM D3792 |
1979 |
Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.100(a)(1) |
AKUIC regulations |
1984 |
Alaska Statutes, Alaska Oil and Gas Conservation Act, Title 31, §§ 31.05.005 through 31.30.010 (1979 and Cum. Supp. 1984)
|
State of Alaska |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(f)(3)(iv)(B) |
ASME OM Code |
2004 |
Code for Operation and Maintenance of Nuclear Power Plants
|
American Society of Mechanical Engineers |
Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(2)(ii) |
EN50128/IEC 62279 |
2011 |
Railway Applications: Communications, Signaling, and Processing Systems Software for Railway Control and Protection Systems
|
European Standards |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (19) |
APHA Method 6630 B |
2000 |
Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD
|
American Public Health Association |
Food and Drug Administration |
|
21 CFR 177.1630(e)(4)(v) |
ASTM D2117 |
1982 |
Tentative Method of Test for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.1700(b)(2) |
NCUIC regulations |
1988 |
N.C. ADMIN. CODE, Title 15, r. 02L.0100 et seq. Criteria and Standards Applicable to Injection Wells
|
State of North Carolina |
Environmental Protection Agency |
|
40 CFR 63.8105 Maximum true vapor pressure (3) |
ASTM D2879 |
1983 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(h)(3) |
IEEE 603 |
1991 |
Standard Criteria for Safety Systems for Nuclear Power Generating Stations
|
Institute of Electrical and Electronics Engineers |
Environmental Protection Agency |
|
40 CFR 80.580(e)(1)(i) |
ASTM D2622 |
2010 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.903(o)(2) |
ICEA S-87-640 |
2006 |
Standard for Optical Fiber Outside Plant Communications Cable, 4th edition
|
International Telecommunication Union--Telecommunication |
Environmental Protection Agency |
|
40 CFR 141.40(a)(3) Table 1 (1,3-butadiene) |
EPA Method 524.3 |
2009 |
Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.485a(d)(1) |
ASTM E260 |
1991 |
Standard Practice for Packed Column Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 86.007-15(m)(7) |
ASTM E29 |
1993 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.902(m)(9) |
ASTM D4565 |
1999 |
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.470 (g) |
API RP 2N |
2021 |
Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions
|
American Petroleum Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(3) |
Drawing No. SA-SID-053 |
1994 |
Thorax Assembly
|
Reprographic Technologies |
Coast Guard |
|
46 CFR 185.604(f) |
IMO Resolution A.760(18) |
1993 |
Symbols Related to Life-Saving Appliances and Arrangements
|
International Maritime Organization |
Housing and Urban Development Department |
|
24 CFR 100.201 Accessible route |
CABO/ANSI A117.1 |
1992 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (16) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Coast Guard |
|
21 CFR 145.3(m) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Energy Department |
|
10 CFR 430 Subpart B, App. N, 10.5.1 |
ASHRAE 103 |
1993 |
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Coast Guard |
|
46 CFR 162.161-5(b)(1) |
UL 2127 |
2001 |
Standard for Safety for Inert Gas Clean Agent Extinguishing System Units
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (30) |
EPA Method 200.5 |
2003 |
Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (16) Mercury |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60, Appendix F, Procedure 3, 10.3(3) |
ASTM D6216 |
2012 |
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(e)(2)(iv) |
NFPA 505 |
1969 |
Standard for Type Designations, Areas of Use, Maintenance, and Operation of Powered Industrial Trucks
|
National Fire Protection Association |