This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | 2011 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 16 | 1992 | Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.1 | ICC/IBC | 2000 | International Building Code | International Code Council | |
Coast Guard | 46 CFR 169.703(c)(2) | NFPA 302 | 1980 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 52, Subpart TT | UTSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Utah | |
Coast Guard | 46 CFR 160.171-17(n) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(d)(1)(i) | EPA Method 8020 | 1987 | Aromatic Volatile Organics | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 164.03(b) | IMO SN/Circ. 227 | 2003 | Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.23 | 1992 | Cast Copper Alloy Solder Joint Drainage Fittings | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.459 | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Coast Guard | 21 CFR 131.180(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, I | ASTM A 53/A 53M | 2004 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Energy Department | 10 CFR 430.2, Definitions, Blowout | ASME A112.19.2M | 1995 | Vitreous China Plumbing Fixtures | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.939(a)(3) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(u)(2) | SAE J-231 | 1981 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Public Health Service | 42 CFR 37.10(f)(2) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(14) | ASTM D 756 | 1978 | Standard Practice for Determination of Weight and Shape Changes of Plastics under Accelerated Service Conditions | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3113 B | 1995 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(31) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (31) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(i) | EPA-600-R-93-100 | 1993 | Methods for the Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(ii) | ASTM D 5598 | 2012 | Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling | ASTM International | |
Environmental Protection Agency | 40 CFR 147.200(a)(2) | ARUIC regulations | 1981 | Act 105 of 1939, Arkansas Statutes Annotated sections 53-101 through 53-130 (1971 and Supp. 1981); Act 937 of 1979, Arkansas Statutes Annotated sections 53-1301 through 53-1320 (Supp. 1981); Act 523 of 1981 | State of Arkansas | |
Environmental Protection Agency | 40 CFR 63.5758(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(3)(iii) | EPA-600-4-91-010 | 1991 | Method 200.8--Determination of Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.176-8(c)(2)(ii) | FAA TSO-C13d | 1983 | Federal Aviation Administration Standard for Life Preservers | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 46 CFR 111.33-3(a)(1) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(27)(iv) | OIA Method PAI-DK03 | 1994 | Nitrogen, Total Kjeldahl, Block Digestion, Automated FIA Gas Diffusion | OI Analytical | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5320-10 | 1974 | Environmental Enhancement at Airports--Industrial Waste Treatment | Federal Aviation Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.4.1 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.102(c)(2) | NFPA 51A | 2001 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Coast Guard | 46 CFR 160.031-4(c) | FedSpec T-R-605B | 1963 | Rope, Manila, and Sisal with 1973 Amendment 3 | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1755.702(g)(5) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(iv) | ASTM D 3120 | 2008 | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 160.026-6(d) Table 160.026-6(d)(2) | USPHS Publication 956 | 1965 | Drinking Water Standards | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 174.360 | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 12 | 2014 | Carbon Dioxide Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.133-7(a)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(b) | Drawing No. 175-0000, Sheet 3 of 6 | 2009 | Exterior dimensions of ES-2re test dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4107 | 1991 | Standard Test Method for Tritium in Drinking Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 2005 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7470 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.292 (j) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i)(B) | ASTM A 53 | 1969 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International |