This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 118.410(g)(2) | UL 1058 | 1989 | Halogenated Extinquishing System Units as amended through April 19, 1994 | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.121 Table A | Drawing No. 127-3000 | 2009 | Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-(2,4-Dichlorophenoxy) propionic acid) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 B | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(l)(15) | EPA SW-846-7740 | 1986 | Selenium (Atomic Absorption, Furnace Technique), Revision 0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xi) | ASTM D5599 | 2000 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.56(b)(2)(i) | NAVSEAINST 8020.8B | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.336(b) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(b) | IEC 651 | 1979 | Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (110) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(i) | ASTM D388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Federal Communications Commission | 47 CFR 25.146(a)(2) | ITU Radio Regulations, Volume 1: Articles, Article 22, “S... | 2016 | Control of interference to geostationary-satellite systems | International Telecommunication Union--Telecommunication | |
Environmental Protection Agency | 40 CFR 98.7(e)(16) | ASTM D2505 | 2004 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.15 | ASHRAE 41.1 | 2001 | Standard Method for Temperature Measurement | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(c)(6) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 176.30(a)(5)(ii) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(c)(4) | ANSI/RESNA Standard WC/Vol. 1, Section 13 | 1998 | Wheelchairs: Determination of Coefficient of Friction of Test Surfaces | Rehabilitation Engineering and Assistive Technology Society (RESNA) | |
Coast Guard | 40 CFR 60.41c Distillate oil | ASTM D975 | 1978 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63.626(d)(3)(vi)(A) | AOAC Method 957.02 | 1995 | Phosphorus (Total) in Fertilizers, Preparation of Sample Solution, Sixteenth edition | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM A74 | 1992 | Cast Iron Soil Pipe and Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 282.95(d)(1)(i)(A) | VTUSTP | 1995 | Vermont Statutory Requirements Applicable to the Underground Storage Tank Program | State of Vermont | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C13 | ASTM F1055 | 1998 | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D2622 | 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.703 Table 1 | ASTM D5186 | 2009 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.65-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | USGS I-3850-78 | 1979 | Tin, AA direct aspiration | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxxv) | ASTM D3223 | 2007 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, D | ASTM E1163 | 1998 | Standard Test Method for Estimating Acute Oral Toxicity in Rats | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.103(c) | NHTSA Publication | 1995 | Free-Motion Headform User's Manual, Version 2 | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(62) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 177.1312(c)(2) | ASTM D1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (11) | APHA Method 4140 B | 1997 | Bromide, CIE/UV | American Public Health Association | |
Environmental Protection Agency | 40 CFR 272, Subpart R | KSHWMP | 2021 | State of Kansas Hazardous Waste Management Program (Reserved) | State of Kansas | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.2(a) | AGA Report No. 3, Part 2 | 1991 | Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.197(e)(1)(i) | ASTM D1922 | 2000 | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method | ASTM International | |
Food and Drug Administration | 21 CFR 184.1221(b) | Food Chemicals Codex | 1981 | Calcium Propionate | National Academy Press | |
Energy Department | 10 CFR 440 Appendix A | UL 296 | 1989 | Oil Burners | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1)(viii) | Drawing No. 880105-728-2 | 2000 | Complete Arm Assembly, Right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (23) | ASTM D2036A | 2009 | Standard Test Methods for Cyanides in Water, Total Cyanides after Distillation | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D2622 | 2007 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST CS 138 | 1955 | Insect Wire Screening | National Institute of Standards and Technology, U.S. Department of Commerce | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1194 | 1994 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Coast Guard | 46 CFR 148.220(b)(1) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.146(c) | Drawing No. SA-572-S19 | 1987 | Load-moment Transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Fensulfothion) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International |