| Mine Safety and Health Administration |
|
30 CFR 75.301 Non-combustible material |
ASTM E119 |
1988 |
Standard Test Methods for Fire Tests of Building Construction and Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.151-5(d)(4) |
IMO Revised recommendation on testing |
2010 |
Life-Saving Appliances, including LSA Code, Revised recommendation on testing of life-saving appliances
Archived
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 28.40(b) |
NFPA 302 |
1989 |
Pleasure and Commercial Motor Craft
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 175.600(b) Table |
IMO Resolution A.688(17) |
1991 |
Fire Test Procedures for Ignitability of Bedding Components
Archived
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 160.041-1(b)(1) |
NIST R-178 |
1941 |
Packaging of First-Aid Unit Dressings and Treatments
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Coast Guard |
|
46 CFR 160.062-1(a)(1) |
MIL-R-15041C |
1954 |
Releases, Lifesaving Equipment, Hydraulic and Manual
Archived
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 169.115(c)(1) |
ABYC A-22 |
1978 |
Marine Compressed Natural Gas Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-1 |
1993 |
Marine Liquefied Petroleum Gas Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-3 |
1993 |
Recommended Practices and Standards Covering Galley Stoves
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-7 |
1970 |
Recommended Practices and Standards Covering Boat Heating Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-16 |
1989 |
Electric Navigation Lights
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-22 |
1993 |
Marine Compressed Natural Gas Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC E-8 |
2001 |
Alternating Current (AC) Electrical Systems on Boats
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC E-9 |
1990 |
Direct Current (DC) Electrical Systems on Boats
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-2 |
1989 |
Ventilation of Boats Using Gasoline
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-22 |
1986 |
DC Electric Bilge Pumps Operating Under 50 Volts
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-24 |
1993 |
Gasoline Fuel Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-25 |
1994 |
Portable Fuel Systems for Flammable Liquids
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-32 |
1987 |
Ventilation of Boats Using Diesel Fuel
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-33 |
1989 |
Diesel Fuel Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC P-1 |
1993 |
Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC P-4 |
1989 |
Marine Inboard Engines
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 39.1005(g)(1) |
NEMA Publication WD-6 |
1988 |
Wiring Devices, Dimensional Requirements
Archived
|
National Electrical Manufacturers Association |
| Coast Guard |
|
46 CFR 160.151-5(f)(1) |
MIL-C-17415F |
1989 |
Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use
Archived
|
U.S. Department of Defense |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(vi) |
IEC 61094-3 |
1995 |
Measurement Microphones--Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique, edition 1.0
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(vii) |
IEC 61094-4 |
1995 |
Measurement Microphones--Part 4: Specifications for Working Standard Microphones, edition 1.0
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(viii) |
IEC 61260 |
1995 |
Electroacoustics-Octave-Band and Fractional-Octave-Band Filters, edition 1.0
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(ix) |
IEC 61265 |
1995 |
Instruments for Measurement of Aircraft Noise-Performance Requirements for Systems to Measure One-Third-Octave-Band Sound pressure Levels in Noise Certification of Transport-Category Aeroplanes, edition 1.0
Archived
|
International Electrotechnical Commission |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(x) |
IEC 60942 |
1997 |
Electroacoustics--Sound Calibrators, edition 2.0
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 164.023-3(b)(3) |
Federal Standard 191A |
1978 |
Method 5804, Weathering Resistance of Cloth; Accelerated Weathering Method
Archived
|
Federal Specifications Standards and Test Methods |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(3) |
ICAO Annex 16 |
2002 |
Environmental Protection, Volume I, Aircraft Noise
Archived
|
International Civil Aviation Organization |
| Coast Guard |
|
46 CFR 160.048-1(a)(2) |
FedSpec CCC-C-426D |
1970 |
Cloth, Drill, Cotton
Archived
|
Federal Specifications Standards and Test Methods |
| National Highway Traffic Safety Administration |
|
49 CFR 572.120(a)(3) |
SAE J-211 |
1995 |
Instrumentation for Impact Tests
Archived
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.140(a)(3) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests—Part 1-Electronic Instrumentation
Archived
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.140(a)(1)(ii) |
Drawing No. TE-208-000 |
2001 |
Headform
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(c)(3) |
ANSI/SAE Z26.1 |
1996 |
Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways-Safety Standard
Archived
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(c)(2) |
ANSI Z26.1a |
1980 |
Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
Archived
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M010 |
1987 |
Head assembly
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(9) |
ASTM D1836 |
2007 |
Standard Specification for Commercial Hexanes
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(10) |
ASTM D1945 |
2003 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(vi) |
ASTM C1149 |
2002 |
Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(vii) |
ASTM C1224 |
2003 |
Standard Specification for Reflective Insulation for Building Applications
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(ix) |
ASTM C1371 |
2004 |
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(x) |
ASTM C1374 |
2003 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
Archived
|
ASTM International |
| Federal Trade Commission |
|
16 CFR 460.5(e)(2)(i) |
FedSpec HH-I-530A |
1971 |
Insulation, Board, Thermal (Urethane)
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.005-1(a)(3) |
MIL-R-2766 |
1960 |
Batt, Fibrous Glass, Lifesaving Equipment
Archived
|
U.S. Department of Defense |
| Coast Guard |
|
33 CFR 154.106(g)(2) |
NFPA 70 |
2008 |
National Electrical Code
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 28.40(b) |
ABYC E-1 |
1972 |
Bonding of Direct Current Systems
Archived
|
American Boat and Yacht Council |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(l)(6) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section I
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 25.01-3(b) |
ABYC A-1 |
1978 |
Marine Liquefied Petroleum Gas Systems
Archived
|
American Boat and Yacht Council |