| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(i) |
ASTM C177 |
2004 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus
Archived
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 522.2640(a) |
FDA Publication |
2001 |
Determination of Factor Content in Tylosin by High Performance Liquid Chromatography
Archived
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1) |
FIPS Publication 140-2 |
2001 |
Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1)(i) |
FIPS Publication 140-2 |
2004 |
Annex A to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Security Functions
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1)(ii) |
FIPS Publication 140-2 |
2004 |
Annex B to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Protection Profiles
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1)(iii) |
FIPS Publication 140-2 |
2005 |
Annex C to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Random Number Generators
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1)(iv) |
FIPS Publication 140-2 |
2004 |
Annex D to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Key Establishment Techniques
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(2) |
FIPS Publication 180-2 |
2004 |
Secure Hash Standard (SHS) as amended by Change notice 1
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(4) |
FIPS Publication 186-2 |
2001 |
Digital Signature Standard (DSS) as amended by change notice 1
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(i)(5) |
AWS D2.0 |
1969 |
Specifications for Welding Highway and Railway Bridges
Archived
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(i)(6) |
AWS D8.4 |
1961 |
Recommended Practices for Automotive Welding Design
Archived
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(i)(7) |
AWS D10.9 |
1969 |
Standard Qualification of Welding Procedures and Welders for Piping and Tubing
Archived
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(j)(1) |
NIST CS 202-56 |
1961 |
Industrial Lifts and Hinged Loading Ramps
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(j)(2) |
USDOC Publication |
1977 |
Model Performance Criteria for Structural Fire Fighters' Helmets
Archived
|
U.S. Department of Commerce |
| Food and Drug Administration |
|
21 CFR 172.869(b)(2) |
MCC Publication |
1998 |
Method for Measuring the Ester Distribution of Sucrose Oligoesters
Archived
|
Mitsubishi Chemical Corporation |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(1) |
CGA C-6 |
1968 |
Standards for Visual Inspection of Compressed Gas Cylinders
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(2) |
CGA C-8 |
1962 |
Standard for Requalification of ICC-3HT Cylinders
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(3) |
CGA G-1 |
2009 |
Acetylene
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(4) |
CGA G-7.1 |
1966 |
Commodity Specification
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(5) |
CGA G-8.1 |
1964 |
Standard for the Installation of Nitrous Oxide Systems at Consumer Sites
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(6) |
CGA P-1 |
1965 |
Safe Handling of Compressed Gases
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(7) |
CGA P-3 |
1963 |
Specifications, Properties, and recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(8) |
CGA S-1.1 |
1963 |
Safety Release Device Standards-Cylinders for Compressed Gases with 1965 Addenda
Archived
|
Compressed Gas Association |
| Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(E)(10)(v) |
EPA-600-4-91-010 |
1991 |
Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry
Archived
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(9) |
CGA S-1.2 |
1963 |
Safety Release Device Standards-Cargo and Portable Tanks for Compressed Gases
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(10) |
CGA S-1.3 |
1959 |
Safety Release Device Standards-Compressed Gas Storage Containers
Archived
|
Compressed Gas Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-1641 |
1982 |
Floor Covering, Translucent or Transparent Vinyl Surface with Backing, Amendment 2
Archived
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(11) |
CGA Standard Hose Connection Standard, 1957 |
1957 |
Standard Hose Connection Standard
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(12) |
CGA Publication |
1958 |
CGA and RMA Specification for Rubber Welding Hose
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(13) |
CGA Publication |
1958 |
Regulator Connection Standard
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(l)(1) |
CMAA Specification 1B61 |
2013 |
Specification for Electric Overhead Traveling Cranes
Archived
|
Crane Manufacturer's Association of America |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(m)(1) |
FedSpec GG-B-0067b |
1965 |
Air Compressed for Breathing Purposes or Interim Federal Specifications
Archived
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(n)(1) |
DHHS Publication 76-120 |
1975 |
List of Personal Hearing Protectors and Attenuation Data
Archived
|
U.S. Department of Health and Human Services |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(o)(1) |
IME Pamphlet No. 17 |
1960 |
Safety in the Handling and Use of Explosives
Archived
|
Institute of Makers of Explosives |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(p)(1) |
NEMA EW-1 |
1962 |
Requirements for Electric Arc Welding Apparatus
Archived
|
National Electrical Manufacturers Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(1) |
NFPA 30 |
1969 |
Flammable and Combustible Liquids Code
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(2) |
NFPA 32 |
1970 |
Standard for Dry Cleaning Plants
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(3) |
NFPA 33 |
1969 |
Standard for Spray Finishing Using Flammable and Combustible Liquids
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(6) |
NFPA 35 |
1970 |
Standard for the Manufacture of Organic Coatings
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(7) |
NFPA 36 |
1967 |
Standard for Solvent Extraction Plants
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(9) |
NFPA 51B |
1962 |
Standard for Fire Protection in Use of Cutting and Welding Processes
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(8) |
NFPA 37 |
1970 |
Standard for the Installation and use of Stationary Combustion Engines and Gas Turbines
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(10) |
NFPA 54 |
1969 |
Standard for the Installation of Gas Appliances and Gas Piping
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(11) |
NFPA 54A |
1969 |
Standard for the Installation of Gas Piping and Gas Equipment on Industrial Premises and Certain Other Premises
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(12) |
NFPA 58 |
1969 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(13) |
NFPA 59 |
1968 |
Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(14) |
NFPA 62 |
1967 |
Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(15) |
NFPA 68 |
1954 |
Guide for Explosion Venting
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(17) |
NFPA 78 |
1968 |
Lightning Protection Code
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(18) |
NFPA 80 |
1968 |
Standard for Fire Doors and Windows
Archived
|
National Fire Protection Association |