| Environmental Protection Agency |
|
40 CFR 75.59(b)(6)(iii) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.59(d)(4)(iii) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 2.1.1.1(c) |
ASTM D3176 |
2002 |
Standard Practice for Ultimate Analysis of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 2.1.1.1(c) |
ASTM D3177 |
2007 |
Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 2.1.1.1(c) |
ASTM D5865 |
2010 |
Standard Test Method for Gross Calorific Value of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 5.1.4(a) |
EPA-600-R-97-121 |
1997 |
EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 5.1.4(b) |
EPA-600-R-97-121 |
1997 |
EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 5.1.5 |
EPA-600-R-97-121 |
1997 |
EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(a) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(b) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(d)(3) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(f) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(g) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
ASME MFC-4M |
1997 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
ASME MFC-5M |
1994 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
ASME MFC-7M |
1992 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
ASME MFC-9M |
2001 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
API MPMS |
1993 |
Chapter 4, Section 3
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.1 |
API MPMS |
1988 |
Chapter 4, Section 3
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.2(a) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.2(a) |
AGA Report No. 3, Part 2 |
1991 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.5.2(a) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
AGA Report No. 3, Part 2 |
1991 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) |
AGA Report No. 3, Part 2 |
1991 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) |
AGA Report No. 3, Part 2 |
1991 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) |
AGA Report No. 3, Part 2 |
1991 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.3 |
ASTM D4177 |
2000 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.1 |
ASTM D4057 |
2000 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.2 |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.2 |
ASTM D4057 |
2000 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.3(c) |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.3(c) |
ASTM D4057 |
1981 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.5 |
ASTM D129 |
2000 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.5 |
ASTM D5453 |
2000 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.6 |
ASTM D287 |
2000 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.6 |
ASTM D1217 |
1998 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.6 |
ASTM D1480 |
1997 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.6 |
ASTM D1481 |
1997 |
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.6 |
ASTM D4052 |
2002 |
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.7 |
ASTM D5865 |
2010 |
Standard Test Method for Gross Calorific Value of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.3.3.1.2 |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.3.4 |
ASTM D1826 |
1998 |
Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
ASTM International |