This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D1266 | 2003 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | ASTM International | |
Coast Guard | 46 CFR 182.420(b) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D97 | 1987 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63.782 High-gloss specialty coating | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Food and Drug Administration | 21 CFR 184.1866(b) | Food Chemicals Codex | 1996 | High Fructose Corn Syrup | National Academy Press | |
Public Health Service | 42 CFR 52b.12(c)(2) | ASHRAE Handbook | 1995 | Chapter 13, Laboratory Systems | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 145.135(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Rural Utilities Service | 7 CFR 1755.860(e)(4) | ASTM D4872 | 1988 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds | ASTM International | |
Rural Utilities Service | 7 CFR 1755.503(c) | IEEE C2 | 1997 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 1573 | 1995 | Stage and Studio Lighting Units | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.120(a)(1) | RT Publication | 2009 | Parts List and Drawings, Part 572 Subpart N, Hybrid III Six-Year Old Child Crash Test Dummy (H-III6C, Beta Version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Propachlor) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 194.22(a)(1) | ASME NQA-1 | 1989 | Quality Assurance Program Requirements for Nuclear Facilities | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(15) | ASTM C33-07 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Coast Guard | 46 CFR 111.50-3(g)(2) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 195.3(c) E2 | ASTM A106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 7.81(b) | 7 CFR 205 | 2014 | National Organic Program Rules | U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (109) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | APHA Method 3500-Cd D | 1990 | Cadmium by Colorimetric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(26) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (27) | AOAC Method 973.52B | 1990 | Hardness of Water | AOAC International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Environmental Protection Agency | 40 CFR 98.314(f) | ASTM D3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(8) | ANSI A14.2 | 1956 | Safety Code for Portable Metal Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 173.128(e) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Environmental Protection Agency | 40 CFR 63.1513(d) | EPA-625-3-89-016 | 1989 | Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo-p-Dioxins and Dibenzofurans (CDDs and CDFs) | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.926d(b)(3)(i) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 12 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (70) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-600-R-95-131 | 1995 | Methods for the Determination of Organic Compounds in Drinking Water--Supplement III | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2000(b)(6) | RIUIC regulations | 1981 | Hazardous Waste Management Facility Operating Permit Rules and Regulations—Landfills, at last amended November 2, 1981 (hereinafter referred to as the Hazardous Waste Regulation) | State of Rhode Island | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i)(B) | ASTM D6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart Q | 1989 | Administrative Code | State of Illinois | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.3 | ASTM F1487 | 2001 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use | ASTM International | |
Coast Guard | 33 CFR 126.15(a)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-5(h)(2) | UL 1185 | 1996 | Standard for Safety for Portable Marine Fuel Tanks, Fourth Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (10) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxvii) | ASTM D1889 | 2000 | Standard Test Method for Turbidity of Water (Withdrawn 2007) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Heterotrophic bacteria) | APHA Method 9215 B | 2000 | Pour Plate Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(20) | EPA-520-5-84-006 | 1984 | Radiochemistry Procedures Manual | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Minerals Management Service | 10 CFR 434.701.1 RS-11 | NWWDA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-11) | National Wood Window and Door Association | |
Environmental Protection Agency | 40 CFR 60.334(h)(1) | ASTM D6228 | 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.3(c)(2) | ASTM F2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International |