Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (8)(b)(i) |
CGA G-4.3 |
2000 |
Commodity Specification for Oxygen
|
Compressed Gas Association |
Minerals Management Service |
|
30 CFR 250.490(g)(4)(iv) |
ANSI Z88.2 |
1992 |
Respiratory Protection
|
American National Standards Institute |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(12) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Institutional (837)
|
Washington Publishing Company |
Energy Department |
|
10 CFR 430.3(c)(2) |
ANSI C78.20 |
2003 |
Electric Lamps--A, G, PS, and Similar Shapes with E26 Medium Screw Bases
|
American National Standards Institute |
National Highway Traffic Safety Administration |
|
49 CFR 572.120(a)(1)(i) |
Drawing No. 127-1000 |
2009 |
Drawings and Specifications for the Hybrid III 6-year-old Dummy, Head Assembly
|
Reprographic Technologies |
Energy Department |
|
10 CFR 431.106(b) Table |
ANSI Z21.10.3 |
1998 |
Standard for Gas Water Heaters
|
American National Standards Institute |
Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(2)(i) |
ISO 2535:2001(E) |
2001 |
Plastics—Unsaturated-polyester resins—Measurement of gel time at ambient temperature, Third Edition
|
International Organization for Standardization |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
MSS SP-61 |
2001 |
Pressure Testing of Steel Valves
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
Environmental Protection Agency |
|
40 CFR 300.915(c)(8) |
ASTM D1310 |
1986 |
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(2) |
Drawing No. 78051-64 |
1987 |
Torque jam nut
|
General Motors Corporation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Mevinphos) |
EPA Method 507 |
1995 |
Nitrogen & Phosphorous Pesticides (Drinking Water)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.17(t)(1) |
EN 303-5 |
2012 |
Heating boilers—Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW—Terminology, requirements, testing and marking
|
European Committee for Standardization |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 179.2(a)(8) |
NIST Handbook H-28 |
1966 |
Handbook of Screw-Thread Standards for Federal Service
|
National Institute of Standards and Technology, U.S. Department of Commerce |
Surface Mining Reclamation and Enforcement Office |
|
30 CFR 870.20 Table 2 |
ASTM D2234 |
1989 |
Standard Practice for Collection of a Gross Sample of Coal
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (107) |
EPA Method 1625 B |
1990 |
Semivolatile Organic Compounds by Isotope Dilution GC/MS
|
U.S. Environmental Protection Agency |
Federal Communications Commission |
|
47 CFR 15.118(d) |
EIA-IS-132 |
1994 |
Cable Television Channel Identification Plan
|
Electronic Industries Association |
Coast Guard |
|
46 CFR 28.345(b) |
ABYC E-1 |
1972 |
Bonding of Direct Current Systems
|
American Boat and Yacht Council |
Environmental Protection Agency |
|
40 CFR 444.12(b) Appendix (3) |
ASTM Annual Book of Standards |
1994 |
ASTM Annual Book of Standards, Vol. 11.01
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 98.124(e)(1)(ii) |
EPA Other Test Method 24 |
2006 |
Tracer Gas Protocol for the Determination of Volumetric Flow Rate Through the Ring Pipe of the Xact Multi-Metals Monitoring System, also known as Other Test Method 24 (Tracer Gas Protocol), Eli Lilly and Company Tippecanoe Laboratories
|
U.S. Environmental Protection Agency |
Occupational Safety and Health Administration |
|
29 CFR 1910.120(a)(3) Public Exposure Level |
ACGIH Publication |
1987 |
Threshold Limit Values and Biological Exposure Indices for 1987-88
|
American Conference of Governmental Industrial Hygienists |
Coast Guard |
|
46 CFR 160.077-21(c)(1) |
UL 1517 |
2012 |
Hybrid Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
National Highway Traffic Safety Administration |
|
49 CFR 571.3(b), Designated seating position (1) |
SAE J-1100a |
1975 |
Motor Vehicle Dimensions
|
Society of Automotive Engineers |
Rural Utilities Service |
|
7 CFR 1755.703(k) |
ICEA S-89-648 |
1993 |
Standard for Telecommunications Aerial Service Wire, Technical Requirements
|
Insulated Cable Engineers Association |
Environmental Protection Agency |
|
40 CFR 63.772(h)(5)(v) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
Labor Department |
|
41 CFR 50-204.65 |
CGA C-6 |
1978 |
Standard for Visual Inspection of Compressed Gas Cylinders
|
Compressed Gas Association |
Coast Guard |
|
46 CFR 177.300(d)(1)(ii) |
ABS Publication |
1983 |
Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length
|
American Bureau of Shipping |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(g)(17)(i) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels with Addenda
|
American Society of Mechanical Engineers |
Public Health Service |
|
42 CFR 37.44(g)(2) |
AAPM Report No. 31 |
1990 |
Standardized Methods for Measuring Diagnostic X-Ray Exposures, Report of Task Group 8, Diagnostic X-Ray Imaging Committee
|
American Association of Physicists in Medicine |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASHRAE Handbook |
1989 |
Fundamentals
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Environmental Protection Agency |
|
40 CFR 60.633(h)(1) |
ASTM D86 |
1990 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5340-1D |
1973 |
Marking of Paved Areas on Airports
|
Federal Aviation Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 32 |
USGS Publication |
1975 |
Water Temperature-Influential Factors, Field Measurement and Data Presentation, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) |
EPA Method 508 |
1995 |
Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 147.1251(a)(4) |
MSUIC regulations |
1987 |
State of Mississippi Oil and Gas Board Statewide Rules and Regulations, Rules 1 through 65, inclusive (Aug. 1, 1987, as amended, Sept. 17, 1987)
|
State of Mississippi |
Environmental Protection Agency |
|
40 CFR 98.314(c) |
ASTM D5373 |
2008 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(19) |
ANSI B30.2.0 |
1967 |
Safety Code for Overhead and Gantry Cranes
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 24, Section 6.1 |
ASTM D1475 |
1960 |
Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (8) |
ASTM D5673 |
2005 |
Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xx) |
ASTM D1293 |
2000 |
Standard Test Methods for pH of Water
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.715(e)(1) |
UL 94 |
1996 |
Test for Flammability of Plastic Materials for Parts in Devices and Appliances, Fifth Edition, with 2001 revisions
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 141.131(b)(1) Table Note 2 |
APHA Standard Methods, 20th Edition |
1998 |
Standard Methods for the Examination of Water and Wastewater. 20th Edition
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63.14(g)(67) |
ASTM D5954 |
2006 |
Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
|
ASTM International |
Food and Drug Administration |
|
21 CFR 177.1020(d)(2) |
FDA Publication |
1987 |
Extracted Acrylonitrile Monomer by Differential Pulse Polarography
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Environmental Protection Agency |
|
40 CFR 63.14(g)(88) |
ASTM E145 |
1994 |
Standard Specification for Gravity-Convection and Forced- Ventilation Ovens
|
ASTM International |
Coast Guard |
|
46 CFR 160.048-4(b) |
Federal Standard 751 |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
Mine Safety and Health Administration |
|
30 CFR 75.333(d)(1) |
ASTM E162 |
1987 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
ASTM International |
Research and Special Programs Administration |
|
45 CFR 162.920(a)(10) |
ASC X12 |
2006 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim: Dental (837)
|
Washington Publishing Company |
Environmental Protection Agency |
|
40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) |
ASTM D396 |
1990 |
Standard Specification for Fuel Oils
|
ASTM International |
Energy Department |
|
10 CFR 440 Appendix A |
ASTM C665 |
1988 |
Blanket Mineral Fiber Insulation
|
ASTM International |
Coast Guard |
|
46 CFR 105.5 |
ASTM D323-08 |
2008 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM International |