This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix A, Table 4 | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (10) | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 2 | 1991 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 2: Specification and Installation Requirements | American Gas Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 179/A 179M | 1990 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.417(a)(3)(i) | ANSI N14.1 | 1995 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(149) | ASTM D 4084 | 2005 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Coast Guard | 46 CFR 133.70(c)(2)(i) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Research and Special Programs Administration | 24 CFR 200.925c(a)(1)(iii) | ICBO Uniform Plumbing Code | 1991 | Uniform Plumbing Code including the 1992 Code Changes but excluding Part I—Administration, but including the Appendices of the Code | International Conference of Building Officials | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 3173 | 2008 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
Food and Drug Administration | 21 CFR 184.1007(b)(1) | Food Chemicals Codex | 1996 | Aconitic Acid 1996 HHS/FDA | National Academy Press | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 6667 | 2004 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence | ASTM International | |
Coast Guard | 46 CFR 169.529(mm) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1504 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Coast Guard | 46 CFR 111.60-11(c) | UL 83 | 1998 | Standard for Thermoplastic-Insulated Wires and Cables, Twelfth Edition | Underwriters Laboratories, Inc. | |
Federal Highway Administration | 23 CFR 625.4(b)(10) | AASHTO Publication | 1994 | Standard Specification for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.8 | ASHRAE 41.2 | 1992 | Standard Methods for Laboratory Airflow Measurement | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.132-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(1) | NHTSA Publication | 2009 | Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(D) | EPA Method 218.6 | 1994 | Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 46 CFR 111.60-13(a) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Food and Drug Administration | 21 CFR 1.24(a)(6)(i) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.350(a)(2) | CTUIC regulations | 1990 | Connecticut General Statutes Annotated, Title 22a (Environmental Protection), Chapter 446K | State of Connecticut | |
Environmental Protection Agency | 40 CFR 52.741(a)(2)(iii)(A) | 35 I.A.C. 218 | 1989 | Organic Material Emission Standards and Limitations for the Chicago Area | State of Illinois | |
Coast Guard | 46 CFR 52.20-1(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 5504 | 2001 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas Fuels by Gas Chromatography and Chemiluminescence | ASTM International | |
Coast Guard | 46 CFR 105.01-3(b)(1) | ASTM D 323 | 1979 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.2 | ASME A18.1 | 2003 | Safety Standard for Platform Lifts and Stairway Chairlifts | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61.18(a)(7) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Coast Guard | 33 CFR 104.120(a)(4) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (16) | ASTM C 150 | 1977 | Standard Specification for Portland Cement | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 119.425(c) | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Housing and Urban Development Department | 24 CFR 3280.714(a)(1)(iii) | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Food and Drug Administration | 21 CFR 184.1979b(b)(2) | Food Chemicals Codex | 1996 | Reduced Minerals Whey | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1926.405(c)(2)(ii)(J) | ANSI/NFPA 70 | 2014 | National Electrical Code, Article 400, Table 400-4 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | DOE HASL-300 | 1990 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 2, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-396 | 1974 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 98.284(d) | ASTM D 5373 | 2008 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | ASTM D 511A | 2003 | Calcium by EDTA Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7520 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency |