DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(74) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(90) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(4) | ASTM C 330-05 | 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(1) | AGA Report No. 7 | 2006 | Measurement of Natural Gas by Turbine Meters | American Gas Association |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(10) | API MPMS | 2005 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(27) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 6—Pipeline Metering Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(43) | API MPMS | 1995 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | 2004 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(91) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(5) | ASTM C 595-08 | 2008 | Standard Specification for Blended Hydraulic Cements | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(2) | AGA Report No. 9 | 2007 | Measurement of Gas by Multipath Ultrasonic Meters Second Edition | American Gas Association |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | 2001 | Chapter 3—Tank Gauging | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(28) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 7—Metering Viscous Hydrocarbons | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(44) | API MPMS | 2003 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2—Measurement Tickets | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(60) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(76) | API RP 86 | 2005 | API Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(92) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(1) | AWS D1.1:2000 | 1999 | Structural Welding Code—Steel | American Welding Society |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(b)(3) | AGA Report No. 10 | 2003 | Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases | American Gas Association |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(12) | API MPMS | 2005 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(29) | API MPMS | 2001 | Chapter 7—Temperature Determination, | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(45) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors,Part 3—Proving Reports | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(61) | ANSI/API RP 2N | 2015 | “Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions” | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(77) | API RP 90 | 2006 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(93) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(2) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(c)(1) | ANSI/AISC 360-05 | 2005 | Specification for Structural Steel Buildings | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(13) | API MPMS | 2003 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(30) | API MPMS | 1995 | Chapter 8—Sampling, Section 1—Standard Practice for Manual Sampling of Petroleum and Petroleum Products | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(46) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 4—Calculation of Base Prover Volumes by the Waterdraw Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(62) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(78) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(94) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(3) | AWS D3.6M:1999 | 1999 | Specification for Underwater Welding | American Welding Society |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(1) | ANSI/ASME B 16.5-2003 | 2003 | Pipe Flanges and Flanged Fittings | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(14) | API MPMS | 1998 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(31) | API MPMS | 1995 | Chapter 8—Sampling, Section 2—Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(47) | API MPMS | 1990 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 1—General Equations and Uncertainty Guidelines | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(63) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(79) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(95) | API Standard 65—Part 2 | 2010 | Isolating Potential Flow Zones During Well Construction; Second Edition | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(i)(1) | NACE MR0175-2003 | 2003 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments | National Association of Corrosion Engineers |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(2) | ANSI/ASME B 31.8-2003 | 2003 | Gas Transmission and Distribution Piping Systems | American National Standards Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(15) | API MPMS | 2000 | Chapter 4—Proving Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(32) | API MPMS | 2002 | Chapter 9—Density Determination, Section 1—Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(48) | API MPMS | 2000 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 2—Specification and Installation Requirements | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(64) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(80) | API RP 2556 | 1993 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |